professional range catalogue - Tannoy

Ceiling Subwoofers
Overview
The CMS 110TB Tile Bridge
ceiling subwoofer is a 250 mm
(10.00”) drive unit in a compact
down-firing, vented cabinet
capable of 31 Hz @ -3 dB (26 Hz
@ -10dB). Easy to install and with
no special construction
requirements, the CMS 110TB
drops into a 2’ x 2’ ceiling tile
space; integrating invisibly into
the installation environment by
using a standard air conditioning
vent cover as a speaker grille.
Description
The CMS 110TB features a resonance decoupling system and additionally each corner of the cabinet is fitted with a seismic tether point. The four
corner flying points allow the unit to be flown in free space via a 3/8” threaded rod, a chain or aircraft cable. Fire rating is NFP-A Grade A.
Incorporating a 200 mm x 250 mm (8.00” x 10.00”) input module located on the side of the cabinet, ensuring that controls are easily accessed by lifting
the adjacent ceiling tile. The CMS 110TB can be ordered with a passive input module (110 TB-P) connected via barrier strip, or with a passive internal
crossover (CMS 110TB-PX). Both passive modules can be powered by a THP 60 Watt / 70 Volt line transformer for distributed systems
(CMS 110TB-P70V and CMS 110TB-PX70V).
Tech Brief CMS 110TB-P CMS 110TB-PX CMS 110TB-A
Driver Complement
Dispersion
Freq Range (-10 dB)
Sensitivity (1 W @ 1 m)
Rated Max SPL
Rec. Amp Power
Weight
Dimensions (HxWxD)
Overview
A compact, down-firing, vented
ceiling subwoofer cabinet with
250 mm (10.00”) long throw
driver capable of 31 Hz @ -3 dB
(26 Hz @ -10 dB). The CMS110
SR Sheet Rock subwoofer flush
mounts into sheet rock ceilings,
walls, or overhangs - any position
offering adequate clearance and
suitable structural support. The
unit comes complete with a low
profile square grille.
Description
The CMS 110SR cabinet is fitted with seismic tether points and comes with a sturdy pre-installation ring (CMS 110SR-Ring) for safe and secure installation of
the unit. (The pre-installation ring is available separately for new construction where the sheet rock installers arrive before the contractor.) Fire rating for the 110
SR is NFPA Grade A.
The CMS 110SR incorporates a 200 mm x 250 mm (8.00” x 10.00”) input module located on the side of the cabinet. The input module controls are easily
accessed by removing the grille and the unit remains serviceable and fully removeable from below after installation. The CMS 110SR can be ordered with a
passive input module (CMS 110SR-P) connected via barrier strip, or with a passive internal crossover (CMS 110SR-PX). Both passive modules can be
powered by a THP 60 Watt / 70 Volt line transformer for distributed systems (CMS 110SR-P70V and CMS 110SR-PX 70V).
Driver Complement
Dispersion
Freq Range (-10 dB)
Sensitivity (1 W @1 m)
Rated Max SPL
Rec. Amp Power
Weight
Dimensions (HxWxD)
250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub
- - -
26 Hz – 15 0Hz 26 Hz – 150 Hz 26 Hz – 150 Hz
- - -
105 dB (average) 111 dB (peak) 105 dB (average) 111 dB (peak) 105 dB (average) 111dB (peak)
110 W 110 W 110 W
18.1 kg 18.1 kg 18.1 kg
251 mm x 598 mm x 598 mm 251 mm x 598 mm x 598 mm 251 mm x 598 mm x 598 mm
(9.8” x 23.5” x 23.5”) (9.8” x 23.5” x 23.5”) (9.8” x 23.5” x 23.5”)
Tech Brief CMS 110SR-P CMS 110SR-PX CMS 110SR-A
250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub 250 mm (10”) direct radiating sub
- - -
26 Hz – 150Hz 26 Hz – 150 Hz 26 Hz – 150 Hz
- - -
105 dB (average) 111 dB (peak) 105 dB (average) 111 dB (peak) 105 dB (average) 111 dB (peak)
110 W 110 W 110 W
15.4 kg 15.4 kg 15.4 kg
318 mm x 483 mm x 483 mm 318 mm x 483 mm x 483 mm 318 mm x 483 mm x 483 mm
(12.4” x 19” x 19”) (12.4” x 19” x 19”) (12.4” x19” x 19”)
020