professional range catalogue - Tannoy

VNET SC1
Overview
In its basic configuration the Tannoy
VNET SC1 is a powerful ‘2 in 6 out’
digital system controller which
provides multiple X-Over, EQ, Delay
and Limiting options. Using
DSP-based digital crossovers
with 96 kHz sampling rates, this
versatile controller will enable
simple configuration and
optimisation of loudspeakers in
terms of speaker management
and room EQ functionality.
Description
Two versions of the VNET SC1 are available – one with a VNET network card and one without; offering a competitively priced, yet highly versatile
solution for flexible system configuration and optimising the performance of loudspeaker systems. Any of the inputs (A, B, or sum) can be routed to any
output with the unique routing engine of the VNET SC1. The universal switch mode power supply automatically adapts to mains voltages from 85 to
240 volts.. The ‘network enabled’ version facilitates VNET networking capability with two network ports provided for connection to any Tannoy VNET
system. Set up of the unit is exceptionally simple thanks to the intuitive signal flow based interface, or it can be controlled from a PC with Tannoy’s
standard VNET software
Tech Brief VNET SC1
Inputs Two x XLR
Outputs Six x XLR
Sample rate / bit depth 96 kHz / 24 bit
Frequency response 10 Hz – 40 kHz
(+/- 3 dB with filters disabled)
Frequency response 20 Hz – 20 Hz
(+/- 0.5 dB with filters disabled)
LP / HP filter types 12, 18 & 24 dB/octave Bessel and
Butterworth 12, 24 and 48 dB/octave
Linkwitz Riley 4th or 8th
order Hardman
Installing VNET SC1
Installing the VNET SC1
Using a Tannoy VNET SC1 with a powered loudspeaker system
(e.g. Tannoy POWERV)
RS232*
AUDIO SOURCE
VNET SC1
* The VNET interface allows networking of multiple VNET speakers or SC1 controllers
* VNET TM interface allows networking of multiple VNET TM speakers or SC1 controllers KEY Network connection
Audio connection
KEY
Network connection
Audio connection
064
Using a network enabled VNET SC1 to combine an existing
Tannoy VNET system with another loudspeaker system
(e.g. Tannoy POWERV)
VNET TM interface
AUDIO SOURCE
VNET SC1
* The VNET interface allows networking of multiple VNET TM speakers or SC1 KEY Network connection
* The VNET interface allows networking of multiple VNET speakers Audio or connection SC1 controllers
KEY Network connection
Audio connection