PDF - Pella.com

6 INTERIOR SEAL:Caution: Ensure use of low pressure polyurethane window and door insulating foamsand strictly follow the foam manufacturer’s recommendations for application. Use ofhigh pressure foams or improper application of the foam may cause the door frame tobow and hinder operation.A. Add a sealant bead across the inner sill and 6" upeach jamb between the frame and rough opening.InteriorB. Apply insulating foam sealant. From the interior,between the door and the rough openingsurface of the shims to create a continuous seal.Follow foam manufacturer's instructions.Note: DO NOT place any foam between jambextensions and the rough opening.6"6C 6A6A 6BC. Check the door operation by opening andclosing the door.Note: If the door does not operate correctly,check to make sure it is still plumb, level, squareand that the sides are not bowed. If adjustmentsare required, remove the foam with a serratedknife. Adjust the shims, and reapply the insulatingfoam sealant.