AC-DC Single Output Power Module - TDK-Lambda

More documents

Recommendations

Info

PFE500FSequence Time ChartInput Voltage(AC)390VDC(typ)BC Terminal Voltage(Boost Voltage)Output VoltageON/OFFComtrolIOGENAAUXHLHLHLHLHLInput LineONControlOFFControlONOVP TripControlOFFControlONOCPActiveOCPReleaseInput LineOFFInput LineONOTP TripControlOFFControlONV* voltage level: Refer to Application Notes “13.Power ON Signal”section.・All contents are subject to change without notice.
PFE1000FPFE1000F SpecificationsITEMS/UNITSInputMODEL PFE1000F-12 PFE1000F-28 PFE1000F-48Voltage Range (*2)(*3) V 85 - 265 VACFrequency (*2) Hz 47 - 63Power Factor (*1)(*3) 0.95Efficiency (Typ) (*1) % 80 / 82 84 / 86Current (*1) A 9.8 / 4.8 13.6 / 6.6 13.4 / 6.5Inrush Current (Typ) (*1)(*3) A 20 / 40 peakNominal Voltage (*1) VDC 12 28 48Maximum Current A 60 36 21Maximum Power W 720 1008Voltage Setting Accuracy % +/-2OutputMaximum Line Regulation mV 48 56 96Maximum Load Regulation mV 48 56 96Maximum Ripple & Noise (*3) mVp-p 120 280 480Voltage Adjustable Range % -20 / +20Over Current Protection (*4)(*5) 105% - 140%Over Voltage Protection (*5)(*1) At 100VAC/200VAC and maximum output power. (Baseplate Temperature = +25°C.)(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, input voltage range will be 100 - 240VAC(50/60Hz).(*3) External components are needed for operation. (Refer to basic connection and instruction manual.)(*4) Constant current limiting. (The unit automatically shutdown when left in OCP condition, with the output voltageless than the LVP level. Refer to instruction manual.)(*5) Reset : Line off or Control off. (Refer to instruction manual.)(*6) Refer to Instruction manual.(*7) Ambient Temperature min=-40°C(*8) Ratings - refer to Derating Curve.(*9) Heatsink has to be chosen according to Instruction manual.Derating Curve125% - 145% (Inverter shutdown method)Remote Sensing (*6) PossibleFunctionRemote ON/OFF Control (*6)PossibleParallel Operation (*6) PossibleSeries Operation (*6) PossibleOperating Temperature (*7)(*8) ℃ -40 - +100(Baseplate)Storage Temperature ℃ -40 - +100Operating Humidity % RH 20 - 95 (No Dewdrop)Storage Humidity % RH 10 - 95 (No Dewdrop)EnvironmentAt no operating, 10-55Hz (Sweep for 1min.)VibrationAmplitude 0.825mm constant (Maximum 49.0m/s²) X,Y,Z 1 hour eachShock196.1m/s²Cooling (*9) Conduction CooledInput-BaseplateWithstand VoltageIsolationIsolation ResistanceStandards Safety Standards: 2.5kVAC, Input-Output : 3.0kVAC for 1min.Output-Baseplate : 500VDC for 1min.Output to Baseplate 500VDC more than 100MΩ (25°C,70%RH)Approved by UL60950-1, CSA60950-1, EN60950-1Weight (Typ) g 500MechanicalSize (W x H x D) mm 100 x 13.4 x 160 (Refer to Outline Drawing)PFE1000F-12(720W)100Load(%)806040200-40 -20 0 20 40 60 80Baseplate Temperature(℃)100PFE1000F-28,48(1008W)100Load(%)80604085VAC≦Vin170VAC20170VAC≦Vin265VAC085-40 -20 0 20 40 60 80 100Baseplate Temperature(℃)・All contents are subject to change without notice.
Page 6 and 7: PFE500FBasic ConnectionL=50mmINPUTF
Page 10 and 11: PFE1000FPFE1000F Outline DrawingC L
Page 12 and 13: PFE1000FBlock DiagramPFHC+BC -BCDC/
Page 14 and 15: PFE500F・1000F SERIESPFE500F, 1000
Page 16 and 17: PFE500F・1000F SERIES■PFE1000F S
Page 18 and 19: PFE500F・1000F SERIESF1 : External
Page 20 and 21: PFE500F・1000F SERIESRipple Curren
Page 22 and 23: PFE500F・1000F SERIESFig. 3-1Outpu
Page 24 and 25: PFE500F・1000F SERIESHowever, maxi
Page 26: PFE500F・1000F SERIESWithstand vol
Page 31 and 32: PFE500SPFE500S SpecificationsITEMS/
Page 33 and 34: PFE700SPFE700S SpecificationsITEMS/
Page 35 and 36: PFE300S, 500SBlock Diagram Sequence
Page 37 and 38: PFE300S, 500SPFE300S, 500S Instruct
Page 39 and 40: PFE300S, 500SF1: External Input Fus
Page 41 and 42: PFE300S, 500Sl 2 t= Co x Vin2 (A 2
Page 43 and 44: PFE300S, 500SVerify baseplate tempe
Page 45 and 46: PFE700SPFE700S Instruction ManualBE
Page 47 and 48: PFE700SF1: External Input FuseThis
Page 49 and 50: PFE700SFig. 2-1 Output Ripple Volta
Page 51: PFE700S Insulation ResistanceUse DC
Page 54: TDK-Lambda CorporationHEAD OFFICE D

AC-DC Single Output Power Module - TDK-Lambda

Create successful ePaper yourself

Delete template?

Save as template?