C-13872 Instruction E44 Owner's Manual.pdf - Enviro
C-13872 Instruction E44 Owner's Manual.pdf - Enviro
C-13872 Instruction E44 Owner's Manual.pdf - Enviro
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Secondary Installation<br />
fiRebox LineR anD buRneR tube RemoVaL:<br />
NOTE: The firebox liners are fragile and should be handled gently.<br />
1. Ensure the <strong>E44</strong> is turned off and allow the unit to cool.<br />
2. Remove the glass door as shown in the<br />
maIntenance anD serVIce - glass Door remoVal.<br />
WARNING: Do not touch or attempt to remove<br />
the glass if the fireplace is not completely cool.<br />
Never operate the fireplace with the<br />
glass removed.<br />
3. Remove the log set and all ember material (if<br />
installed).<br />
4. Use the following steps to remove the liners<br />
and the burner tube.<br />
NOTE: Follow the steps in the reverse order for<br />
reassembly.<br />
Figure 44: To remove the burner tube, gently pull<br />
it out of the venturi box.<br />
Figure 46: Remove the rear brick panel by pulling<br />
it forward off of the ledge.<br />
Figure 43: Carefully remove the front brick panel<br />
on the bottom of the firebox by lifting it up.<br />
Figure 45: The side brick panels can be removed<br />
by pulling them towards the center of the firebox.<br />
Figure 47: Firebox with all brick panels and burner<br />
tube removed.<br />
33
Change language