SE SERIES INSTRUCTION MANUAL

Instructions manual SE series1.4. Safety informationThe following points must be observed for a correct and safe use of theSAFEasy TM safety device:• The stopping system of the machine must be electricallycontrollable.• This control system must be able to instantly stop the dangerousmovement of the machine during all the phases of the working cycle.• Mounting and connection of the safety light curtain must only becarried out by qualified personnel, according to the indicationsincluded in the special sections (refer to sections 2; 3; 4; 5; 6).• The safety light curtain must be securely placed in a particularposition so that access to the danger zone is not possible withoutthe interruption of the beams (see section 2 “Installation mode”).• The personnel operating in the dangerous area must be well trainedand must have adequate knowledge of all the operating proceduresof the safety light curtain.• The TEST/START button must be located outside the protectedarea because the operator must check the protected area during allthe Test, Override and Reset operations.• The external signalling lamp of the active muting must be visiblefrom any operative side.7