SE SERIES INSTRUCTION MANUAL
SE SERIES INSTRUCTION MANUAL
SE SERIES INSTRUCTION MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Instructions manual <strong>SE</strong> series• Put one fuse with rated interruption current 500 mA between theconnection of the external signalling lamp of active muting and theRX unit. The signalling lamp should be placed in such a way that itcan be seen from every operative side.Read the “Functioning mode” section 6 that shows the muting function,its use and how to position the activation sensors of this function.N.B.: If the muting dev ices (muting sensors and muting lamp) arenot used, the 3, 4 and 8 cable pins of the receiver must beelectrically insulated.21