864 ST Fireplace Installation Manual - Lopi

Finalizing the Installation (for qualified installers only) 13Nailing BracketsThere are eight nailing brackets on the front andback of the fireplace. Follow the directions belowto prepare thenailing brackets. Once inplace, nail or screw thenailing brackets to theframing.NOTE: Additional nailing brackets areprovided along the base of thefireplace. Use these brackets if notusing the front brackets.NOTE: You may need to bend thetabs out on one side then slide thefireplace out to bend the tabs out onthe opposite sideWARNING: Make sure thefireplace is square and plumbwhen placed in the framing.Measured corner-to-corner, thefireplace should be square(approx. 54-7/8” for eachdimension). Use shims toinsure the fireplace is square.1/2” DrywallTOP VIEWFramingFor installations using 1/2” facingfold the larger tabs out 90° onthe right side (use a screwdriverif necessary). Bend the tabs outon the left sideFireplaceDrywallNailing Bracket5/8” DrywallFor installations using 5/8” drywall fold the shorter tabout 90° on the right side. (use a screwdriver ifnecessary). On the left side, remove the side standoff(screws hold it in place) and re-attach it in thealternative holes provided.TOP VIEWFireplaceFramingNailing BracketDrywall© Travis Industries 4071126 100-01195_000