864 ST Fireplace Installation Manual - Lopi

Optional Equipment (for qualified installers only) 574 Carefully place the floorfirebacks into position.You must tip them underand around the cornersof the burner.5 Carefully replace thefront and rear grates(they rest on top of thefloor firebacks).NOTE: These tabs are bent out when using the accent light. Make sureto carefully bend them flush if the accent light was previously installed(then reposition them after firebacks are installed).6 Install the side firebacksfollowing the directionsbelow.aRemove the clips on both sides (loosen the screwsa couple turns and slide clips up and out).5/16" Nutdriver7 Restore the fireplace tothe correctconfiguration.bPlace the side firebacks into position.cSecure the clips to anchorthe side firebacks.The ceramic firebacks are fragile. Ensure proper alignment of individual pieces in each step. To achievethe ideal appearance, you may need to make slight adjustments.© Travis Industries 4071126 100-01195_000