21.07.2015 Views

OPERATION MANUAL - Scintrex

OPERATION MANUAL - Scintrex

OPERATION MANUAL - Scintrex

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Trouble-shootingExternal/InternalGPS problems:- No signal- Can’t synchronizeDisplay contrast isnot responding.Auto contrast isenabledInternal mousedoes not work afteruse of externalmouseThe applicationreports a systemerror after loadingor measurementstartTopographicalmaps, waypoints,map registrationproblemsUSB Memory keydoes not work or isnot recognizedMy data file is lostAntenna is obstructed.PPS Pulse is received.External GPS is notpowered.Remove obstructions from antenna.Check that the PPS Pulse isproperly received by the SM-5NAVMAG.Power up the external GPS.Auto contrast is Disable Auto Contrast.conflicting with theproper contrast setting.cmag.ini files haswrong values.Improper parameters.Improper USB key.You never created adata file in the firstplace.You never backed upyour data file.Reboot the NAVMAG.Check cmag.ini files for propervalues.Use external PC NAVMAG setuputility to create a new cmag.ini file.Transfer this file to the SM-5NAVMAG.Please make sure that you areusing the proper datums, xyz offsetsand SM-5 NAVMAG setup.<strong>Scintrex</strong> strongly recommends theSandisk memory key. All other USBkeys may or may not work or bedetected. Memory key will berecognized as a hard disk whenconnected to the SM-5 NAVMAG.You must open a data file prior totaking a measurement.You must backup the file to the flashcard prior to powering down the unitor changing the batteries.Operations3-35SM-5 Manual - part # 872700 Revision 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!