OPERATION MANUAL - Scintrex

Getting StartedNavigating the KeyboardThe basic keys to navigate, select options and enter data are:The TAB key allows you to navigate between thescreens and, in the X mode, to navigate betweenentry fields. Please refer to “Using the hot keys (Xmode)” on page 1-38 for instructions to enable the Xmode.The Measure/Stop key is used to initiate or stop ameasurement of the magnetic field. In the X mode, itcan be used to select a field choice by navigatingUp.The Back up/Transfer is a dual function key. TheBackup function is used to archive your data fromthe SM-5 NAVMAG’s RAM memory to itsCompact Flash memory. The transfer key allows thetransferring of all data from the SM-5 NAVMAG’sCompact Flash Memory to a USB Memory Stick, ifpresent. In the X mode, it can be used to select afield choice by navigating down.Note:Allow at least 4 seconds following connectionof USB for system recognition before proceedingwith the transfer.The optional Audio function is enabled in themeasurement mode, whereas the Back Lightfunction is the one that is enabled when not in themeasurement mode.The Backlight/Audio is a multi-function key. Whilenot taking measurements, such as during setup orwhen the measurement is paused, you can toggle thebacklight of the console display ON or OFF. Whiletaking measurements you can toggle between AudioON or OFF. In the hot key mode, this key can beused to acknowledge a field choice.1-28SM-5 Operation Manual - part # 872700 Revision. 3