OPERATION MANUAL - Scintrex

Getting StartedAssembling your SM-5 NAVMAG - StandardConfiguration1. Assemble the sensor staff by connecting the staff sections. The unitcomes with five sections: four for the sensor and one to be used as anextension for the GPS antenna. You can use up to four sections for thesensor.2. Slide the two Carry Strap Mounting Clamps onto the staff.3. Screw the Sensor clamp on to the threaded end of the staff.4. Slide the Electronics Mounting Clamp onto the other end of the staff.5. Attach the sensor and the electronics to the staff using the four Velcrostraps supplied (Fig. 1-10 and Fig. 1-11). The sensor cable can then besecured to the staff using the white clamps that have been provided.Fig. 1-10 Fig. 1-11Hint:In order to further secure the electronics to themounting clamp, use a tie-wrap (not supplied)through the middle slot of the clamp.6. Attach the shoulder strap to the two Carry Strap Mounting Clamps1-6SM-5 Operation Manual - part # 872700 Revision 3