You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessing the screens# of SensorsThe SM-5 NAVMAG can accommodate up to 4simultaneous sensors. Only 2 sensors can beaccommodated at the present time. We are planningto accommodate 4 in the future.Note:In the gradient mode, the number of sensors will beset to 2. In the total field mode, the number ofsensors must be 1.SetupShould you wish to use the Internal or External GPSreceiver, you must enable the GPS by clicking onthe GPS box.Note:When the GPS is enabled, you will notice that thestation designation field is disabled.Should you wish to use a background map toenhance your navigation, you can create a base mapand plot your waypoints which will most likely bethe Start and End points of your survey line. Pleaserefer to the next section for more details.Opening and saving your navigationsetupAs part of the GPS-assisted navigation procedure,you must open a waypoint file, a map info file and amap file. These files are obtained by registering yourmap. Please refer to Appendix A “<strong>Scintrex</strong> GPSMap Registration Program” for this procedure.Click on (1) Open Wp’s File, you will then beprompted to open the waypoint file (*.wpt) that youcreated during map registration. (see App. A)2-9SM-5 Manual - part # 872700 Revision 3
Change language