material safety data sheet technoseal™ fp - PT. Harimau Putih

MATERIAL SAFETY DATA SHEETTECHNOSEAL FP1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANYPRODUCT NAME: TECHNOSEAL TMPART NO:APPLICATIONS:SUPPLIER: WALKER TECHNICAL RESOURCES LTDTEL: +44 (0) 1224 822822FAX: +44 (0) 1224 822299E-MAIL:wtr@wtr.uk.comDATE ISSUED: 0601093. HAZARDS IDENTIFICATIONIrritating to skin. Risk of serious damage to eyes.CLASSIFICATION: Xi;R38, R41.3. COMPOSITION/INFORMATION ON INGREDIENTSINGREDIENT NAME: EINECS NO. CAS No. WEIGHT% RISK (R No.)PORTLAND CEMENT 65997-15-1 30-60% Xi; R38,R41HIGH ALMINA CEMENT 65997-16-2 10-30% Xi;R36/38CALCIUM HYDROXIDE 1305-62-0 1-5% Xi;R36/38The full text for all R-phrases are shown in section 154. FIRST AID MEASURESINHALATION:INGESTION:SKIN CONTACT:EYE CONTACT:Move the exposed person to fresh air at once. Provide fresh air, warmthand rest, preferably in a comfortable upright sitting position. Get medicalattention if any discomfort continues.DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUSPERSON VOMIT OR DRINK FLUIDS! Immediately rinse mouth anddrink plenty of water (200-300ml). Get medical attention if anydiscomfort continues.Immediately remove contaminated clothing and wash skin with soapand water. Get medical attention if irritation persists after washing.Promptly wash eyes with plenty of water while lifting the eye lids.Continue to rinse for at least 15 minutes. Get medical attention.5. FIRE FIGHTING MEASURESEXTINGUISHING MEDIA:PROTECTIVE MEASURES INFIRE :The product is non-combustible. Use fire-extinguishing mediaappropriate for surrounding materials.Use protective equipment appropriate for surrounding materials.W28-24

MATERIAL SAFETY DATA SHEETTECHNOSEAL FP6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTION:ENVIRONMENTALPRECAUTION:SPILL CLEANUP METHODS:Avoid contact with skin and eyes. Avoid inhalation of dust. In case ofinadequate ventilation, use respiratory protection.Avoid spreading dust or contaminated materials. Avoid discharge intodrains, water courses or onto the ground.Avoid generation of spreading dust. Collect powder using special dustvacuum cleaner with particle filter or carefully sweep into closedcontainer.7. HANDLING AND STORAGEUSAGE PRECAUTIONS:STORAGE PRECAUTIONS:STORAGE CLASS:Avoid contact with skin and eyes. Observe workplace exposure limitsand minimise the risk of inhalation of dust. Avoid handling which leadsto dust formation. Do not use in confined spaces without adequateventilation and/or respirator.Store in moderate temperatures in dry, well ventilated area..Unspecified storage.8. EXPOSURE CONTROLS AND PERSONAL PROTECTIONNAME Std LT - ppm LT – mg/m3 ST- ppm ST – mg/m3Portland Cement wel 4 mg/m3resp.dusthigh alumina cement wel 4 mg/m3resp.dustPROTECTIVE EQUIPMENT:PROCESS CONDITIONS:ENGINEERING MEASURES:RESPIRATORY EQUIPMENT:HAND PROTECTION:EYE PROTECTION:HYGIENE MEASURES:OTHER PROTECTION:Provide eyewash station.Provide adequate ventilation Observe Workplace Exposure Limits andminimise the risk of inhalation of dust.If ventilation is insufficient, suitable respiratory protection must beprovided. Dust filter P2 (for fine dust).Use protective gloves made of: Rubber or plasticWear dust resistant safety goggles where there is a danger of eyecontact.Wash at the end of each work shift and before eating, smoking andusing the toilet, wash promptly with soap & water if skin becomescontaminated. When using doe not eat, drink or smoke.Wear appropriate clothing to prevent repeated or prolonged skincontact.W28-24

MATERIAL SAFETY DATA SHEETTECHNOSEAL FP9. PHYSICAL AND CHEMICAL PROPERTIESAPPEARANCE:Powder, dustSOLUBILITY:Insoluble in water.RELATVITY DENSITY: 1.0310. STABILITY AND REACTIVITYSTABILITY:CONDITIONS TO AVOID:MATERIALS TO AVOID:HAZARDOUSPOLYMERISATION:Stable under normal temperature conditions and recommended use.Not known.Strong acids. Strong oxidising substances. Moisture.Will not polymerise.11. TOXICOLOGICAL INFORMATIONINHALATION:INGESTION:SKIN CONTACT:EYE CONTACT:ROUTE OF ENTRY:TARGET ORGANS:MEDICAL SYMPTOMS:MEDICALCONSIDERATIONS:SPECIAL EFFECTS:Dust may irritate throat and respiratory system and cause coughing.May cause discomfort if swallowed.Irritating to skin. May cause sensitisation by skin contact.Risk of serious damage to eyes.Inhalation. Skin and/or eye contact. Ingestion.Respiratory system, lungs. Skin. Eyes.Upper respiratory irritation. General respiratory distress, unproductivecough. Skin contact may cause: Allergic rash. Skin irritation. Eye contactmay cause: Extreme irritation of eyes and mucous membranes, includingburning and tearing. May cause discomfort if swallowed.Chronic respiratory and obstructive airway diseases. Skin disorders andallergies.Frequent inhalation of dust over a long period of time increases the risk ofdeveloping lung diseases.12. ECOLOGICAL INFORMATIONECOTOXICITYBIOACCUMULATION:DEGRADABILITY:The product components are not classified as environmentallyhazardous. However, this does not exclude the possibility that large orfrequent spills can have a harmful or damaging effect on theenvironment.No data available on bioaccumulation.No data available13. DISPOSAL CONSIDERATIONSDISPOSAL METHODS:Do not allow runoff to sewer, waterway or ground. Dispose of waste andresidues in accordance with local authority requirements.W28-24

MATERIAL SAFETY DATA SHEETTECHNOSEAL FP14. TRANSPORT INFORMATIONGENERAL:MARINE POLLUTANT:The product is not covered by international regulation on the transport ofdangerous goods (IMDG, IATA, ADR/RID).No15. REGULATORY INFORMATIONLABEL FOR SUPPLY:IrritantCONTAINS:BUTANEDIOLDIGLYCIDYL ETHEREPOXY PHENOL NOVOLACEPOXY RESIN (Number average MW

MATERIAL SAFETY DATA SHEETTECHNOSEAL FPR41Risk of serious damage to eyes.DISCLAIMERTHIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHERMATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS, TO THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE INDICATED.HOWEVER, NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR COMPLETENESS. IT IS THE USER’S RESPONSIBILITY TO SATISFYHIMSELF AS TO THE SUITABILITY OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE.W28-24