GV-Smart Box

More documents

Recommendations

Info

4Administrator Mode4.5.2 UMTSUMTS stands for Universal Mobile Telephone System. UMTS is a third-generation (3G)broadband, packet-based transmission of text, digitized voice, video, and multimedia at datarates up to 2 megabits per second. UMTS offers a consistent set of services to mobilecomputer and phone users, no matter where they are located in the world.After a mobile broadband device (supporting UMTS, HSDPA, etc.) is attached to the USBport on the front panel and the UMTS function is enabled, the GV-Smart Box can havewireless broadband access. For supported mobile broadband devices, see Appendix.Figure 4-1637
[UMTS Settings]• PIN Number: Type the PIN number that is provided by your network operator.• APN: Type the Access Point Name that is provided by your network operator.• Username: Type a valid username to enable the UMTS service from your networkoperator.• Password: Type a valid password to enable the UMTS service from your networkoperator.• MTU: Type the Maximum Transfer Unit. The default value is 1500.• Keep Check UMTS Connection: Select this option to check the UMTS connectionstatus and use the drop-down list to specify the desired time length for check frequency.• Check VPN Connection: Select this option to check the VPN (Virtual Private Network)connection status. To check the IP address, type the target IP address in the CheckTarget IP Address field.• UMTS Authentication Protocol: Use the drop-down list to select the UMTSAuthentication Protocol provided by your network operator.[3G Connection Status] Indicates the connection status of UMTS or VPN.38
Page 1 and 2: GV-Smart BoxUser's Manual V1.0.1Bef
Page 3 and 4: PrefaceWelcome to the GV-Smart Box
Page 6 and 7: 1IntroductionChapter 1 Introduction
Page 8 and 9: 1Introduction1.4 Optimal Camera Ins
Page 10 and 11: 1Introduction1.6 Reference for Reco
Page 12 and 13: 1Introduction1.8 OverviewThis secti
Page 14 and 15: 2Getting StartedChapter 2 Getting S
Page 17 and 18: Chapter 3 Accessing the GV-SmartBox
Page 19 and 20: 3.2.1 People Counting and Face Coun
Page 21 and 22: 3.2.1.2 Face CounterTo configure th
Page 23 and 24: 3.2.2 Network StatusTo view the net
Page 25 and 26: 4.1 Video and MotionThis section in
Page 27 and 28: 4.1.2 Detection ModeThe Detection M
Page 29 and 30: 4.1.3 GV-Smart Box SettingsThe GV-S
Page 31 and 32: 4.2.2 Output SettingThe GV-Smart Bo
Page 33 and 34: 4.3.2 Compact DVR SettingThe GV-Sma
Page 35 and 36: 4.3.4 Database InquiryYou can query
Page 37 and 38: To query log data of Face Counter:1
Page 39 and 40: 4.4 ScheduleThe Schedule section al
Page 41: • PPPoE: The Network environment
Page 45 and 46: Before enabling the DDNS function,
Page 47 and 48: 4.6 ManagementThe Management sectio
Page 49 and 50: 4.6.2 Storage SettingsThe GV-Smart
Page 51 and 52: 4.6.3 User AccountThe GV-Smart Box
Page 53 and 54: 4.6.5 ToolsThis section allows you
Page 55 and 56: 5.1.1 Upgrading Firmware over LAN1.
Page 57 and 58: 4. Click the Firmware Upgrade tab.
Page 59 and 60: Chapter 6 The I/O Terminal Block6.1
Page 61 and 62: Chapter 7 Integration with other GV
Page 63 and 64: 7.2 Connecting to GV-SystemThe inte
Page 65 and 66: 8. Select TCP/IP Port from the Prin
Page 67 and 68: SpecificationsGV-Smart Box V1GV-Sma

GV-Smart Box

Create successful ePaper yourself

Delete template?

Save as template?