Version 15.1 User’s Manual

Understanding the PerfNav Key Code Process (cont)
Individual Key Code
Upon receiving the individual key code(s) from MPG:
1. Run Performance Navigator.
2. Click "Edit/IBM i Options/Keycode".
If it is not already selected, use the pull-down box to select the system name to which the code
will be applied.
(1) Enter the key in the individual key code field
(2) If LPAR’d environment—Press the APPLY TO LPARs
Button
(3) Double click on the software key box and enter the key code. Repeat steps 3
& 4 for each system and/or partition to which you are applying a code.
(4) Close this window by clicking the "X" in the upper right corner of the
window.
(5) Terminate the Performance Navigator program
(6) Re-start Performance Navigator. If the key code is valid, all functions
should now be unlocked and available.
Version 15 User Manual Page 81 Oct 2011