The driving force

7
44 Drive adapter
GROTEFELD G07-1.1-P
Standard configurations and
machine specific executions upon request
M10
ø11 H7
SW17
ø21
GROTEFELD G07-1.1-P
45
85
85
35 35 (50) (50)
Breather
Breather
Störkontur ø125mm
Störkontur ø125mm
35 42
35 42
131.2
8 1 . 4
8 1 . 4
82.6
131.2
Drive adapter
Standard configurations and
machine specific executions upon request
82.6
Lubrication nipple
Lubrication nipple
7 °
50
7 °
1 0 °
1 0 °
77 11.1
50
1 0 °
77 11.1
1 0 °
Possible solid spindle
position range
Possible solid spindle
position range
Collet receptacle Hi-Q/ERM20
clamping depth
Collet receptacle Hi-Q/ERM20
clamping depth
32
Collet receptacle Hi-Q/ERM20
Collet ER20
(option)
Collet receptacle Hi-Q/ERM25
clamping depth
32
28.2
32
28.2
Screwcap ER20M
ø0,5-13mm
35
Screwcap ER20M
(Hook wrench Gr.E20M)
28.2
ø0,5-13mm
Screwcap ER20M
(Hook wrench Gr.E20M)
9.5
ø0,5-13mm
ø28
SW36
Collet ER20
clamping (option) depth
ø28
SW36
ø0,5-16mm
Collet ER20
(option)
ø28
SW36
ø35
SW27
(Open end spanner)
Screwcap Hi-Q/ERM25
(Hook wrench Gr.E25M)
Counter nut CM/ER25M
with SW36
Collet ER25
(option)
Technical features
Item Id.
EP-030820
drive turning direction
L.H.
drive speed max.
permanent operation 1.000 – 14.400 rpm
interval operation 1.000 – 18.000 rpm
number of spindles 1
spindle position
max. 10° tilted up or down
tool receptacle
Hi-Q/ERM20 DIN6499-C (8°) for collet
ER20 DIN6499-B (ø0,5mm – ø13mm)
gear ratio
1 : 1 – wheel drive
turning direction of tool receptacle opposite to drive turning direction
spindle speed max.
permanent operation 1.000 – 14.400 rpm
interval operation 1.000 – 18.000 rpm
drive capacity
3,0 kW
weight without drive adapter
approx. 1,80 kg
Optional accessories:
Open end spanner SW 36 Item Id. 131036
Key for collet Item Id. 137001
Lubrication press Item Id. 980003
The angular heads of the series G07 offer you the possibility to
choose an angular head with a fixed spindle position between
10° bended up and up to 10° bended down. In the two-spindleexecution
the 180° opposite tool receptacle may have another
angle than the other tool receptacle. The determined angle
cannot be modified afterwards. The spindle turning direction is
opposite to the drive turning direction. The drive speed is transferred
to the tool receptacles in a ratio of 1:1. The maximum
spindle speed in interval operation is 18,000 rpm.
The Item Id. EP-030820 denominates the angular drilling head
W07-1.1-P only, but does not determine a specific spindle position.
It is necessary in case of an order to indicate the requested
angle of the milling spindle in addition to the Item Id. Corresponding
to your order you will receive the final Item Id. within the
order confirmation for the angular milling head you ordered. This
Item Id. than applies for this specific configuration and can be
used in case of further orders without additional information.
Variants on demand!