The driving force
The driving force. - tretek.no
The driving force. - tretek.no
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
80 GROTEFELD G30<br />
GROTEFELD G30<br />
81<br />
176.5<br />
ø50<br />
ø30 j6<br />
39<br />
Holder with thrust bearing to<br />
removed tool change<br />
78<br />
ø4 m6<br />
4<br />
30<br />
60<br />
182.1<br />
(83.1)<br />
Drive adapter<br />
Standard configurations and<br />
machine specific executions upon request<br />
Breather<br />
4x M8x25 DIN 912 to<br />
Loosen and clamps<br />
(Hex-wrench SW6)<br />
m a x . ø 1 6 0<br />
80<br />
Tool receptacle<br />
Slotted nut M30x1, 5 self-locking<br />
29.95<br />
146.55<br />
50.05<br />
Technical features<br />
Item Id.<br />
EP-032830<br />
drive turning direction<br />
R.H./L.H.<br />
drive speed max.<br />
interval operation 9.290 rpm<br />
number of spindles 1<br />
spindle position<br />
horizontal<br />
tool receptacle<br />
Ø30j6 x 060 mm with thrust bearing - removed<br />
(Tool ø160 mm max.)<br />
gear ratio 1:1,29 – Gears and belt drive<br />
turning direction of tool receptacle opposite to drive turning direction<br />
spindle speed max. interval operation 12.000 rpm<br />
drive capacity<br />
3,5 kW<br />
weight without drive adapter<br />
approx. 4,50 kg<br />
Optional accessories:<br />
Hex-wrench SW6 Item Id. 138060<br />
Open end spanner SW41(flat) Item Id. 131203<br />
Hook wrench 40/42 Item Id. 139040<br />
Lubrication press Item Id. 980003<br />
trouble contour ø235mm<br />
(Hook wrench 40/42)<br />
80<br />
79<br />
23<br />
46<br />
94<br />
182.1<br />
TK=ø40<br />
ø4 m6<br />
4<br />
Cylinder pins (353 112)<br />
be supplied loose!<br />
max. Werkzeug ø160<br />
ø30 j6<br />
SW41<br />
(Open end spanner)<br />
<strong>The</strong> angular heads of the series G030 are especially designed for<br />
milling of horizontal surfaces. <strong>The</strong> casing is equipped with one<br />
processing spindle for receptacle of tools with an aluminium base.<br />
<strong>The</strong> spindle turning direction of the tool receptacles is opposite to<br />
the drive turning direction. <strong>The</strong> drive speed is transferred to the tool<br />
receptacle in a ratio of 1:1,29. <strong>The</strong> maximum spindle speed is 12.000<br />
rpm in interval operation.<br />
Tools (by customer)<br />
Inflation ring (optional)<br />
max.60<br />
Type Note Order<br />
G30-090 Tool receptacle - Ø30j6 x 090 EP-032820<br />
G30-120 Tool receptacle - Ø30j6 x 120 EP-032810<br />
Attention:<br />
In the selection and purchase of tools, cutters should be preferred to a<br />
support body made of aluminum to keep the rotating mass <strong>force</strong>s as<br />
low as possible. Additionally a fine counter balance of the tools has to<br />
be considered.<br />
Variants on demand!