The driving force

Recommendations

Info

attitude of the tracing force SW27 (Open end spanner SW27) 118 Receptacle Views for FN7 Receptacle Views for FN7 ø1-ø16mm Screwcap Hi-Q/ER25 (Hook wrench Size 30/32) (Collet ER25 DIN 6388) Slide ring of steel, polyamide or hard chrome plated 119 Collet receptacle Size12 Collet receptacle Hi-Q/ER32 Fixing the trace bell (Hex-wrench SW4) Fixing the trace bell (Hex-wrench SW4) attitude of the tracing force 30N-100N with hex-wrench SW5 attitude of the tracing force 30N-100N with hex-wrench SW5 SW27 (Open end spanner SW27) SW36 Open end spanner SW36) Screwcap Hi-Q/ER25 (Hook wrench Size 30/32) Screwcap Hi-Q/ER32 (Hook wrench Size 40/45) (Collet Size 12 DIN 6388) (Collet ER32 DIN 6388) ø1-ø12mm Slide ring of steel, polyamide or hard chrome plated ø2-20mm Slide ring of steel, polyamide or hard chrome plated Collet receptacle Hi-Q/ER25 Collet receptacle Hi-Q/ER40 Fixing the trace bell (Hex-wrench SW4) attitude of the tracing force 30N-100N with hex-wrench SW5 SW27 (Open end spanner SW27) Screwcap Hi-Q/ER25 (Hook wrench Size 30/32) (Collet ER25 DIN 6388) Fixing the trace bell (Hex-wrench SW4) attitude of the tracing force 30N-100N with hex-wrench SW5 SW36 (Open end spanner SW36) Screwcap Hi-Q/ER40 (Hook wrench Size 58/62) (Collet ER40 DIN 6388) ø1-ø16mm Slide ring of steel, polyamide or hard chrome plated ø2-25mm Slide ring of steel, polyamide or hard chrome plated Collet receptacle Hi-Q/ER32 Fixing the trace bell (Hex-wrench SW4) attitude of the tracing force 30N-100N with hex-wrench SW5 SW36 Open end spanner SW36) Screwcap Hi-Q/ER32 (Hook wrench Size 40/45) (Collet ER32 DIN 6388) ø2-20mm Slide ring of steel, polyamide or hard chrome plated Collet receptacle Hi-Q/ER40 Fixing the trace bell (Hex-wrench SW4)
7 5 3 1 8 6 4 2 0 120 GROTEFELD FN7-1.1-S-TA GROTEFELD FN7-1.1-S-TA 121 172 10mm Abtasthub 143.5 4 ø154 ø129 0,2 0,1 threefold guide 0 0,9 0,8 Tool ø200max. Drive adapter Standard configurations and machine specific executions upon request SW15 (Open end spanner) 70 X Scaling for height adjustment (pitch 0.01 mm 55 45 135.5 26 30 Tracing arm with slide piece (adjustable in height and angular position) Zoom X 0 7 5 3 1 8 6 4 2 0 Scaling for height adjustment (pitch 0.01 mm Technical features Item Id. EP- ------- drive turning direction R.H. drive speed max. interval operation = 18.000 rpm number of spindles 1 tool receptacle ø22h6 x 4 mm tracing stroke max. 10 mm tracing force 30 – 100N (adjustable) gear ratio 1:1 turning direction of tool receptacle equal to drive turning direction (R.H.) spindle speed max. interval operation = 18.000 rpm drive capacity 3,0 kW weight approx. 4,80 kg Optional accessories: Open end spanner SW15 Item Id. 131001 Open end spanner SW30 Item Id. 131030 Hex-wrench SW4 Item Id. 138040 Hex-wrench SW5 Item Id. 138050 Functionary attitude of the tracing force 30N-100N with hex-wrench SW5 3-5 mm Tool receptacle receptacle flange M20x1,5 ø22 h6 Tool ø200max. 145 Pressure ring Clamping nut SW30 (Open end spanner) Fixing the trace bell (Hex-wrench SW4) Tracing arm screwable and adjustable 55 10 12 8 8mm 8mm Slide piece of steel or polyamide Adjustment of trace bell infinitely adjustable and fixable The tracing spindles of the series FN7 work with a spring suspended stroke of 10 mm. The distance of the tool receptacle to the tracing arm or bell is constant. The sensing device is guided over the workpiece surface and adapts the suspension stroke through the different workpiece tolerances. In that way for example Lammello-connections, grooves or feathers are always done in a constant distance to the surface of the work piece. For different materials, it is necessary to adapt the tracing force. At the FN7 this can easily be changed by the user with an adjustment screw. Depending on the surface of the workpiece either sliding rings of polyamide or hard chrome plated steel can be used, on request with blow-off nozzles. The height between the tracing bell to the tool can be adjusted continuously by scale. Variants on demand!
Page 1 and 2:
120 1 The driving force. GROTEFELD
Page 3 and 4:
4 Survey Survey 5 W01 angular sawin
Page 5 and 6:
8 Survey Survey 9 G30 angular heads
Page 7 and 8:
12 13 Sawing units Drilling units M
Page 9 and 10: Drive adapter Standard configuratio
Page 11 and 12: 20 GROTEFELD G03-4.4-P GROTEFELD G0
Page 13 and 14: 24 GROTEFELD G03-4.4-2B2P GROTEFELD
Page 15 and 16: 28 Receptacle Views for G03 Recepta
Page 17 and 18: 32 GROTEFELD G06-1.1-F GROTEFELD G0
Page 21 and 22: 40 Receptacle Views for G06 Recepta
Page 23 and 24: 7 44 Drive adapter GROTEFELD G07-1.
Page 27 and 28: 52 GROTEFELD W09-4.3-B GROTEFELD W0
Page 29 and 30: Drive adapter 56 GROTEFELD G10-4.5-
Page 31 and 32: 60 GROTEFELD W12 GROTEFELD W12 61 t
Page 33 and 34: 64 GROTEFELD G16-1.1-P Drive adapte
Page 35 and 36: 68 GROTEFELD W17-1.1-P GROTEFELD W1
Page 37 and 38: 72 GROTEFELD W19-1.2-B GROTEFELD W1
Page 41 and 42: 80 GROTEFELD G30 GROTEFELD G30 81 1
Page 43 and 44: 84 GROTEFELD G200-3.3-B GROTEFELD G
Page 45 and 46: 88 GROTEFELD G200-1.1-P16 GROTEFELD
Page 47 and 48: ntour ø116mm 70 39 92 GROTEFELD UN
Page 49 and 50: clam 96 Receptacle Views for UNI1-S
Page 51 and 52: 100 Receptacle Views for DPL Recept
Page 53 and 54: 104 GROTEFELD DN-VCM GROTEFELD DN-V
Page 55 and 56: 108 109 Tracing spindles Direct-dri
Page 57 and 58: 112 GROTEFELD FN6-1.1-B GROTEFELD F
Page 59: 116 GROTEFELD FN7-1.1-S GROTEFELD F
Page 63 and 64: 124 GROTEFELD FN9-1.3-SF GROTEFELD
Page 65 and 66: 128 GROTEFELD FN12-1.1-P30 GROTEFEL
Page 67 and 68: 4 132 GROTEFELD FU7-1.1-S GROTEFELD
Page 69 and 70: 136 Optional accessories Optional a
show all

The driving force

Create successful ePaper yourself

Delete template?

Save as template?