The driving force

Recommendations

Info

122 GROTEFELD FN9-1.3-SF GROTEFELD FN9-1.3-SF 123 Drive is not implement Combination tool Saw / mill set (customer) ø30 j5 Clamping module (2x) with submited stroke max.3mm 65 1,5-5mm Y 57 69 1,0mm 0 tracing stroke X Drive adapter Standard configurations and machine specific executions upon request Lubrication nipple ø30 j5 ø75 188.1 138.1 132 Tool max.ø100 mm 114 158 submited stroke=max 3mm slide pieces of polyamide 67.5 63 76 66 Zoom "X" Sawing-/milling receptacle ø30j5/8mm M4(6x) 8 SW27 154 132 66 20 ø60 6x60°/ø40 ø30 j5 Werkzeug ø100 max. X Technical features Item Id. EP-039501 drive turning direction R.H. / L.H. drive speed max. interval operation = 8.710 rpm permanent operation = 5.161 rpm number of spindles 1 spindle position horizontal one or both sided 180° opposite tool receptacle 1 1x ø30 mm – clamping range 8 mm tool receptacle 2 1x ø30 mm – clamping range 1,5 – 5,0 mm tracing stroke X-direction 1 mm max. sampling X-direction slide pieces of polyamide gear ratio 1:1,55 turning direction of tool receptacle 1 1x equal to drive turning direction turning direction of tool receptacle 2 1x opposite to drive turning direction spindle speed max. interval operation = 13.500 rpm permanent operation = 8.000 rpm drive capacity 3,0 kW weight with drive adapter approx. 7,70 kg Optional accessories: Hex-wrench SW4 Item Id. 138040 Lubrication press Item Id. 980003 66 Zoom "Y" Sawing receptacle 20 trouble contour ø205mm 149.5 82 Lowering DIN74-Bf6 (4x) Recessing screws DIN 7991 (Hex-wrench SW4) M6(4x) ø30 j5 TKø60 ø75 Continued on next page... submited stroke=max 3mm 1,5-5mm
124 GROTEFELD FN9-1.3-SF GROTEFELD FN9-1.3-SF 125 The edgge cutter aggregate is always supplied with a drive spindle according to your indications. It is necessary to indicate - in case of order - the information regarding the drive spindle in question in addition to the articlenumber. Usually it is a spindle according to the DIN / ISO regulations. Corresponding to your order you will receive within our order confirmation a final article-number that was extended by the information referring to the edgge cutter aggregate built for you. This article-number then applies for this specific configuration and can be used for all further orders without any additional information. Description of the function The edge cutter and router FN9-1.3-S offers the opportunity to cut and round even glued and protruding edge bands one-sided traced to the work piece. The FN9-1.3-S is a multi-function aggregate, which is equipped with a cutter-saw and a profile router. The beside placed elongated runners enables the enclosure to the work piece and the vertical working direction. With two integrated pneumatic cylinders the runners are able to be adjusted automatically to the cutters and routers working relation. By fine adjustable end stops the runners can be easily adapted to different tool sets. To realize the compensatory movement of the tracing unit the drive and the working unit are decoupled and connected by movable linear slides free of play. A high dynamic compensation coupling allows spindle speeds of up to 13,500 rpm. This causes a very high surface quality. The tracing force of about 100N is set by the Controlflex coupling and cannot be modified. The unit can be used to cap and round corners of solid wood materials, MDF, particleboards, coating materials, plastics. Variants on demand!
Page 1 and 2:
120 1 The driving force. GROTEFELD
Page 3 and 4:
4 Survey Survey 5 W01 angular sawin
Page 5 and 6:
8 Survey Survey 9 G30 angular heads
Page 7 and 8:
12 13 Sawing units Drilling units M
Page 9 and 10:
Drive adapter Standard configuratio
Page 11 and 12: 20 GROTEFELD G03-4.4-P GROTEFELD G0
Page 13 and 14: 24 GROTEFELD G03-4.4-2B2P GROTEFELD
Page 15 and 16: 28 Receptacle Views for G03 Recepta
Page 17 and 18: 32 GROTEFELD G06-1.1-F GROTEFELD G0
Page 21 and 22: 40 Receptacle Views for G06 Recepta
Page 23 and 24: 7 44 Drive adapter GROTEFELD G07-1.
Page 27 and 28: 52 GROTEFELD W09-4.3-B GROTEFELD W0
Page 29 and 30: Drive adapter 56 GROTEFELD G10-4.5-
Page 31 and 32: 60 GROTEFELD W12 GROTEFELD W12 61 t
Page 33 and 34: 64 GROTEFELD G16-1.1-P Drive adapte
Page 35 and 36: 68 GROTEFELD W17-1.1-P GROTEFELD W1
Page 37 and 38: 72 GROTEFELD W19-1.2-B GROTEFELD W1
Page 41 and 42: 80 GROTEFELD G30 GROTEFELD G30 81 1
Page 43 and 44: 84 GROTEFELD G200-3.3-B GROTEFELD G
Page 45 and 46: 88 GROTEFELD G200-1.1-P16 GROTEFELD
Page 47 and 48: ntour ø116mm 70 39 92 GROTEFELD UN
Page 49 and 50: clam 96 Receptacle Views for UNI1-S
Page 51 and 52: 100 Receptacle Views for DPL Recept
Page 53 and 54: 104 GROTEFELD DN-VCM GROTEFELD DN-V
Page 55 and 56: 108 109 Tracing spindles Direct-dri
Page 57 and 58: 112 GROTEFELD FN6-1.1-B GROTEFELD F
Page 59 and 60: 116 GROTEFELD FN7-1.1-S GROTEFELD F
Page 61: 7 5 3 1 8 6 4 2 0 120 GROTEFELD FN7
Page 65 and 66: 128 GROTEFELD FN12-1.1-P30 GROTEFEL
Page 67 and 68: 4 132 GROTEFELD FU7-1.1-S GROTEFELD
Page 69 and 70: 136 Optional accessories Optional a
show all

The driving force

Create successful ePaper yourself

Delete template?

Save as template?