The driving force
The driving force. - tretek.no
The driving force. - tretek.no
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
74 GROTEFELD G25-1.1-F<br />
GROTEFELD G25-1.1-F<br />
75<br />
158.8<br />
(123.8)<br />
35<br />
71<br />
63 63<br />
126<br />
Drive adapter<br />
Standard configurations and<br />
machine specific executions upon request<br />
Lubrication nipple<br />
trouble contour ø155mm<br />
bei 90°<br />
Locking pin for indexing<br />
45°/67,5°/90° (option)<br />
82.8<br />
Clamping screw<br />
(Hex-wrench SW6)<br />
m a x . 1 0 0 °<br />
Milling receptacle<br />
ø60 x ø30h7 x 5mm<br />
spindle turning direction opposite<br />
to drive turning direction<br />
ø100<br />
Scale with vernier<br />
m a x . 1 0 0 °<br />
Tool (by customer)<br />
5<br />
8<br />
Technical features<br />
Item Id.<br />
EP-032540<br />
drive turning direction<br />
R.H./L.H.<br />
drive speed max. permanent operation 7.755 rpm<br />
drive speed max. interval operation 8.726 rpm<br />
number of spindles 1<br />
spindle position horizontal to vertical adjustable by scale (0°- 100°)<br />
tool receptacle<br />
Ø60 x ø30h7 x 5 mm<br />
gear ratio<br />
1 : 2,06 – toothed belt and gear drive<br />
turning direction of tool receptacle 1x opposite to drive turning direction<br />
spindle speed max. permanent operation 16.000 rpm<br />
spindle speed max. interval operation 18.000 rpm<br />
drive capacity<br />
3,0 kW<br />
weight without drive adapter<br />
approx. 3,00 kg<br />
Optional accessories:<br />
Indexing 45°/67,5°/90° Item Id. 032549<br />
Hex-wrench SW4 Item Id. 138040<br />
Hex-wrench SW6 Item Id. 138060<br />
Open end spanner SW 46 flat Item Id. 131247<br />
Lubrication press Item Id. 980003<br />
Milling receptacle<br />
82<br />
71<br />
76<br />
117<br />
M6; 4x<br />
10<br />
<strong>The</strong> angular milling heads G25-1.1-F have a machining spindle continuously adjustable<br />
by scale. <strong>The</strong> adjustment range is 0° (vertical) up to 100° to both sides.<br />
<strong>The</strong> spindle turning direction is opposite to drive turning direction.<br />
<strong>The</strong> drive speed is transmitted in a ratio of 1:2,06 to the<br />
tool receptacle. <strong>The</strong> maximum spindle speed is 18,000 rpm in<br />
interval operation.<br />
ø60<br />
ø48<br />
ø30 h7<br />
9 0 °<br />
ø12<br />
Variants on demand!<br />
5<br />
SW46<br />
(Open end spanner)<br />
12