The driving force
The driving force. - tretek.no
The driving force. - tretek.no
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
lubrication nipple<br />
to drive turning direction<br />
14 GROTEFELD W01<br />
GROTEFELD W01<br />
lubrication nipple<br />
77<br />
33 (44)<br />
77<br />
33 (44)<br />
trouble contour ø155mm<br />
68<br />
Drive adapter<br />
Standard configurations and<br />
machine specific executions upon request<br />
4.5<br />
spindle rotation opposite<br />
to drive turning direction<br />
ø30 j5<br />
ø30 j5<br />
1,5-5mm<br />
ø75<br />
ø75<br />
M6(4x)<br />
Sawing receptacle<br />
lowering DIN74-Bf6 (4x)<br />
countersunk screw DIN 7991<br />
(hex-wrench SW4)<br />
ø30 j5<br />
TKø60<br />
1,5-5mm<br />
ø75<br />
SW30<br />
Sawing receptacle<br />
clamping nut<br />
L.H. - thread<br />
Technical features<br />
Item Id.<br />
EP-030046<br />
drive turning direction<br />
R.H./L.H.<br />
drive speed max. permanent operation 645 – 5.161 rpm<br />
drive speed max.<br />
interval operation 645 – 6.451 rpm<br />
number of spindles 1<br />
spindle position<br />
horizontal<br />
tool receptacle<br />
Ø75/30 mm - 4xM6 – clamping area 1,5 - 5,0 mm<br />
gear ratio<br />
1 : 1,55 – wheel drive<br />
turning direction of tool receptacle opposite to drive turning direction<br />
spindle speed max. permanent operation 1.000 - 8.000 rpm<br />
spindle speed max. interval operation 1.000 - 10.000 rpm<br />
drive capacity<br />
3,0 kW<br />
weight with drive adapter<br />
approx. 4,50 kg<br />
15<br />
trouble contour ø155mm<br />
68<br />
70 56<br />
4.5<br />
138<br />
1,5-5mm<br />
M6(4x)<br />
SW15<br />
lowering DIN74-Bf6 SW30 (4x)<br />
countersunk screw clamping DIN nut 7991<br />
(hex-wrench SW4) L.H. - thread<br />
M5(4x)<br />
ø30<br />
M20x1,5 j5 L.H. M20x1,5 L.H.<br />
1,5 - 5mm<br />
ø20 h6<br />
SW15<br />
ø30 g6<br />
1,5 - 5mm<br />
1,5-5mm<br />
ø64<br />
TKø60 ø20 h6<br />
ø75 ø30 g6<br />
ø64<br />
Optional accessories:<br />
Hex-wrench SW4 Item Id. 138040<br />
Lubrication press Item Id. 980003<br />
Attention:<br />
With the angular sawing heads of the series W01 the use of saw<br />
blades is possible up to a maximum diameter of 300 mm. <strong>The</strong><br />
freewheeling of the saw blade, however, has to be observed<br />
respectively the max. diameter has to be limited correspondingly<br />
- both depending on the used drive adapters and the drive cover<br />
contour (customer’s part).<br />
70 56<br />
M5(4x)<br />
ø30 j5<br />
TKø52<br />
ø75<br />
Variants on demand!<br />
138<br />
ø30 j5<br />
TKø52<br />
ø75<br />
2<br />
2