M16 Maintenance Manual TM9-1005-319-23.pdf - CombatRifle.net

ARMY TM 9-1005-319-23&P
AIR FORCE TO 11W3-5-5-42
3-10. UPPER RECEIVER AND BARREL ASSEMBLY.
This task covers:
a Disassembly d Reassembly
b Inspection/Cleaning e Test
c Repair
INITIAL SETUP
Test Equipment
References
Tool and Gage Set (item 2, app B) FM 23-9
TM 9-1005-319-10
Tools
(ARMY) Small Arms Repairman Tool Kit
(item 3, app B)
Field Maintenance Basic Less Power
Small Arms Shop Set (item 1, app B)
Modified Needle Nose Pliers (fig E-7, app E)
Equipment Conditions
3-15 Upper receiver and barrel assembly
removed
2-43 Handguard assemblies removed
Materials/Parts
General Safety Instructions
Brush, cleaning, small (item 3, app D)
To avoid injury to your eyes, use care when
Carbon removing compound (item 8,
removing and installing spring-loaded parts.
app D)
When using solid film lubricant or dichlorometh-
Cloth, abrasive (item 13, app D)
ane, be sure the area is well ventilated.
Dichloromethane, technical (item 15,
When using carbon removing compound, avoid
app D)
skin contact If carbon removing compound
Dry cleaning solvent (item 16, app D)
comes in contact with the skin, wash
Gloves, chemical and oil protective (item
thoroughly with running water Using a good
18, app D) lanolin base cream after exposure to the
Grease, molybdenum disulfide (item 19,
compound is helpful Using gloves and
app D)
protective equipment is required.
Lubricant, solid film (item 21, app D)
Pan, wash (item 24, app D)
Polyethylene (item 32, app D)
Sealing compound (item 28, app D)
Target (item 31, app D)
Change 5 3-29