Proto - Douilles à choc

1/4" Drive impact Sockets
1/4" Drive Deep Impact Sockets - 6 Point
> > Proto ® 6 Point Impact Sockets are ideal for use on
stubborn or damaged fasteners, and also on fasteners
made from soft materials.
> > Socket size stamped on tool for easy identification.
> > Side locking hole.
L
B
A
C
D
E
> > Radius-corner socket design
> > Engages flats for better grip
> > Improves the ability to turn
worn or rounded fasteners
Nut End Outside Drive End Outside Nut Depth Bolt Clearance Overall
INCH 6 Diameter (in) (B) Diameter (in) (C) (in) (D) Depth (in) (E) Length (in) (L) Weight (lbs)
3/16 J6506H 5/16 1/2 1/4 1-5/8 2 0.08
7/32 J6507H 23/64 1/2 7/64 1-5/8 2 0.08
1/4 J6508H 25/64 1/2 9/32 1-5/8 2 0.08
9/32 J6509H 7/16 1/2 19/64 1-5/8 2 0.08
5/16 J6510H 1/2 1/2 5/16 1-5/8 2 0.07
11/32 J6511H 33/64 33/64 11/32 1-5/8 2 0.07
3/8 J6512H 9/16 9/16 3/8 1-5/8 2 0.09
7/16 J6514H 21/32 21/32 3/8 1-5/8 2 0.12
1/2 J6516H 11/16 11/16 7/16 1-5/8 2 0.12
9/16 J6518H 51/64 51/64 7/16 1-5/8 2 0.15
5/8 J6520H 7/8 7/8 7/16 1-5/8 2 0.12
7 ASME B107.2
Nut End Outside Drive End Outside Nut Depth Bolt Clearance Overall
MM 6 Diameter (in) (B) Diameter (in) (C) (in) (D) Depth (in) (E) Length (in) (L) Weight (lbs)
5 J6505MH 5/16 1/2 1/4 1-5/8 2 0.08
5.5 J65055MH 23/64 1/2 17/64 1-5/8 2 0.09
6 J6506MH 25/64 1/2 9/32 1-5/8 2 0.08
7 J6507MH 7/16 1/2 19/64 1-5/8 2 0.08
8 J6508MH 1/2 1/2 5/16 1-5/8 2 0.07
9 J6509MH 33/64 33/64 5/16 1-5/8 2 0.07
10 J6510MH 9/16 9/16 3/8 1-5/8 2 0.08
11 J6511MH 21/32 21/32 3/8 1-5/8 2 0.11
12 J6512MH 11/16 11/16 13/32 1-5/8 2 0.13
13 J6513MH 23/32 23/32 7/16 1-5/8 2 0.14
14 J6514MH 51/64 51/64 7/16 1-5/8 2 0.18
15 J6515MH 53/64 53/64 7/16 1-5/8 2 0.18
7 ASME B107.33M
Torx ® is a trademark of Acument Intellectual Properties, LLC
508 Country of origin accurate at time of printing, consult www.protoindustrial.com for updated information.