Proto - Douilles à choc

3/4" Drive impact Adaoters & extensions
3/4" Drive Adapters
> > Use adapters to help increase or decrease drive end size.
> > Do not use hand adapters with power tools.
>
> Do not over torque small sockets when using them with adapters on
large drive tools.
> > Made of forged steel.
> > Size stamped on tool for easy identification.
Overall
Product #
INCH Length (in) Weight (lbs)
J07655 3/4" F x 1" M 2-1/2 0.89
J07656 1" F x 3/4" M 2-7/8 1.42
J7656 5/8" F x 3/4" M 1-31/32 0.40
7 ASME B107.2
3/4" Drive Impact Extensions
>
> Use extensions to gain access to fasteners in locations that would
otherwise be difficult to reach.
> > Male square is oriented in-line with female squares for use with fixed
head torque wrenches.
> > Full chamfer at drive opening (when applicable) for easy engagement
with drive tools.
> > Drive end chamfer and four detents help provide quick positive
engagement with drive tool on any of the socket drive walls.
> > Features two thru holes and a groove to accept a Proto retaining ring or
pin or o-ring to help secure extension to the drive tool anvil.
Product #
Overall
Length (in)
Weight (lbs)
J07565 5 1.48
J07567 7 1.97
J07568 10 2.73
J07569 13 3.12
7 ASME B107.2
3/4" Drive Impact Hex Bit Sockets
> > Stamped size for easy reference.
> > Side locking hole.
INCH
hex
Overall Weight Repair
Length (in) (lbs) Kit Part #
9/16 J075909/16 3-3/4 0.96 J075909/16RK
5/8 J075905/8 3-27/32 1.11 J075905/8RK
3/4 J075903/4 4-3/8 1.75 J075903/4RK
7/8 J075907/8 4-3/4 2.09 J075907/8RK
1 J075901 5-13/64 2.59 J05901RK
7
3/4" Drive Hex Bit Repair Kits
INCH
hex
Weight (lbs)
9/16 J075909/16RK 0.18
5/8 J075905/8RK 0.21
3/4 J075903/4RK 0.41
7/8 J075907/8RK 0.62
1 J075901RK 0.94
7
534 Country of origin accurate at time of printing, consult www.protoindustrial.com for updated information.