Proto - Douilles à choc

mcloutiermas

Impact Sockets

1" Drive Retaining Rings

> > Large drive size crush gauge retaining ring.

>

> Part numbers are embossed on the rings near the point at which the pin

and ring meet.

Product # Description For Groove Dia. (in) Diameter (in) Height (in) Weight (lbs)

JRR10028 Retaining Ring 1" DR 1-3/4" Groove 1-3/4 1-15/16 3/16 0.01

JRR10032 Retaining Ring 1" DR 2" Groove 2 2-3/16 3/16 0.01

JRR10034 Retaining Ring 1" DR 2-1/8" Groove 2-1/8 2-5/16 3/16 0.02

JRR10036 Retaining Ring 1" DR 2-1/4" Groove 2-1/4 2-7/16 3/16 0.02

JRR10040 Retaining Ring 1" DR 2-1/2" Groove 2-1/2 2-11/16 3/16 0.02

JRR10042 Retaining Ring 1" DR 2-5/8" Groove 2-5/8 2-13/16 3/16 0.02

1" Drive O-Rings

> > J10000R1 - “O” ring for impact sockets with a 1" drive.

> > Use with:

> > J10012 thru J10023

> > J10019M thru J10036M

> > J10012SS thru J10018SS

>

> J100185, J10017-LT, J10020-LT, J10607, J10608, J10609

> > J10000R2 - “O” ring for impact sockets with a 1" drive.

> > Use with:

> > J10024 thru J10072

> > J10041M thru J10065M

> > J10024L thru J10044L

> > J10024LS, J10670, J10004, J10005

7

1" Drive impact Retaining Rings & Pins

Product #

Weight (lbs)

J10000R1 0.01

J10000R2 0.01

7

1" Drive Retaining Pins

>

> > Use with:

> > J10012 thru J10023

> > J10019M thru J10036M

> > J10012SS thru J10018SS

>

> J10000P1 - Use for a variety of impact sockets and attachments.

> J100185, J10017-LT, J10020-LT, J10607, J10608, J10609

> > J10000P2 - Use for a variety of impact sockets and attachments.

> > Use with:

> > J10024 thru J10072

> > J10041M thru J10065M

> > J10024L thru J10044L

> > J10024LS, J10670, J10004, J10005

Product #

Weight (lbs)

J10000P1 0.02

J10000P2 0.02

7

4 4 POINT 6 6 POINT 8 8 POINT 12 12 POINT SPL SPLINE TORX ®

Torx ® hex HEX

BLACK OXIDE

WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. 543

+1.800.800.TOOL · Fax: +1.770.648.9108​ · www.protoindustrial.com

More magazines by this user
Similar magazines