08.12.2012 Views

Panasonic Air Conditioner

Panasonic Air Conditioner

Panasonic Air Conditioner

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

13.1.6 Low pressure Prevention control (Gas Leakage Detection)<br />

1. When the conditions listed in the table occur, the compressor stops and restarts after three minutes.<br />

2. If this continuously occurs for twice within 20 minutes, all indoor and outdoor relays will be cut off.<br />

3. This control is not applicable for deice operation.<br />

Comp Frequency 45 Hz or above 64 Hz or above 58 Hz or above 73 Hz or above<br />

Total Outdoor Current 1b�1�3 1b�1�1.6 1b�1�1.3 1b�1�1.6<br />

Indoor Piping Temp 20 � or above 25 � or less 20 � or above 25 � or less<br />

Operation Mode Cool/Dry Heat Cool/Dry Heat<br />

Model RE9JKE RE12JKE<br />

13.1.7 Low Operation Frequency Protection Control<br />

If all following conditions exists, the compressor will run with the frequency of 40 Hz (RE9JKE,RE12JKE) or 30Hz<br />

(RE15JKE)<br />

Models RE9JKE, RE12JKE ����RE15JKE<br />

Intake <strong>Air</strong> Temp. �30 � or �15 � ------------------- �30 � or �14 � �28 � or �14 �<br />

Outdoor Temp. �38 � or �16 � �24 � or �4 � �38 � or �13 � �24 � or �4 �<br />

Indoor Piping Temp. �30 � �0 � �30 � �0 �<br />

Operation Mode Cool / Dry Heat Cool/ Dry Heat<br />

13.1.8 Compressor Tank Temperature Rise Protection Control<br />

a. Control start conditions<br />

For 5 minutes, the compressor continuously operates and outdoor total current is between 0.65A and 1.65A.<br />

During Cooling and Soft Dry operations:<br />

Indoor suction temperature - indoor piping temperature is below 4�.<br />

Indoor temperature and outdoor temperature is 30±5�.<br />

Remote Control setting 16� and Hi Fan Speed.<br />

During Heating operations:<br />

Indoor piping temperature - indoor suction is under 5�.<br />

Indoor temperature and outdoor temperature is 20 ± 2�.<br />

Remote control setting 30� and Hi Fan Speed.<br />

b. Control contents<br />

Compressor stops (and restart after 3 minutes)<br />

If the conditions above happen 2 times within 20 minutes, the unit will:<br />

- Stop operation<br />

- Timer LED blinks and “F91” indicated<br />

13.2 Protection Control For Cooling and Soft Dry Operation<br />

13.2.1 Outdoor <strong>Air</strong> Temperature Control<br />

The compressor operating frequency is regulated in accordance to the outdoor air temperature as shown in the<br />

diagram below.<br />

This control will begin 1 minute after the compressor starts.<br />

Compressor frequency will adjust base on outdoor air temperature.<br />

38<br />

38<br />

free<br />

free<br />

37<br />

37<br />

25<br />

25<br />

16<br />

Free<br />

22<br />

22<br />

18<br />

18<br />

26<br />

38<br />

15<br />

15<br />

11<br />

11<br />

37<br />

26<br />

8<br />

8<br />

47<br />

16<br />

Outdoor air temp.( �.)<br />

Outdoor air temp.( �.)<br />

RE9JKE, RE12JKE RE15JKE<br />

37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!