Anritsu Site Master S332B User Guide - Mr Test Equipment

More documents

Recommendations

Info

� Armored Test Port Extension Cable, 3.0 meter, N (m) to N (m), Part No. 15NN50-3.0A � Armored Test Port Extension Cable, 5.0 meter, N (m) to N (m), Part No. 15NN50-5.0A � Armored Test Port Extension Cable, 1.5 meter, N (m) to 7/16 DIN (f), Part No. 15NDF50-1.5A � Armored Test Port Extension Cable, 1.5 meter, N (m) to 7/16 DIN (m), Part No. 15ND50-1.5A � RF Detector, 1 to 3000 MHz, N(m) input connector, 50 Ohms, Part No. 5400-71N50 � Transit Case for Site Master, Part No. 760-215A � Antenna SMA (f), 50 �, 1.71 to 1.88 GHz, Part No. 2000-1030 � Antenna SMA (f), 50 �, 1.85 to 1.99 GHz, Part No. 2000-1031 � Antenna SMA (f), 50 �, 2.4 to 2.5 GHz, Part No. 2000-1032 � Antenna SMA (f), 50 �, 806 to 869 MHz, Part No. 2000-1034 � Antenna SMA (f), 50 �, 896 to 941 MHz, Part No. 2000-1035 � HP Deskjet 340 Printer, Part No. 2000-766 � Serial-to-Parallel Converter Cable (use with the HP 340 Printer), Part No. 2000-753 � Seiko DPU-414 Thermal Printer, Part No. 2000-754 (U.S.) or 2000-761 (Europe) � US Adapter (use with the DPU-414 Printer), Part No. 2000-1002 � Europe Adapter (use with the DPU-414 Printer) Part No. 2000-1003 � Battery Pack (use with the DPU-414 Printer) Part No. 2000-1004 � Serial Interface Cable (use with the DPU-414 Printer), Part No. 2000-10012 � Thermal Paper (use with the DPU-411/DPU-414 Printer), Part No. 2000-755 � Rechargeable Battery, NiMH Part No. 633-27 � Battery Charger, NiMH only Part No. 2000-1029 Performance Specifications Chapter 1 General Information Performance specifications are provided in Table 1-1, on the following page. 1-3
Chapter 1 General Information Table 1-1. Performance Specifications (1 of 2) Specifications are valid when the unit is calibrated at ambient temperature after a 5 minute warmup. Description Value Site Master: Frequency Range: S113B, S114B S331B, S332B 1-4 5 to 1200 MHz 25 to 3300 MHz Frequency Accuracy (RF Source Mode) 75 parts per million @ 25°C* Frequency Resolution S113B, S114B S331B, S332B SWR: Range Resolution Return Loss: Range Resolution **Distance-To-Fault (DTF): Range (in meters) Resolution (in meters) (Rectangular Windowing) Wattmeter Power Monitor: Range Offset Range Resolution 10 kHz 100 kHz 1.00 to 65.00 0.01 0.00 to 54.00 dB 0.01 dB Test Port, Type N 50 Ohms ***Immunity to Interfering signals up to the level of: S113B, S114B S331B, S332B Maximum Input (Damage Level): Test Port, Type N RF Detector 0 to (Resolution x dp) ( 15 . 10)( ) 8 � Vf �F Where Vf is the relative propagation velocity of the cable . dp is the number of data points (128, 256, 512). �F is F2 - F1 (in Hz.) –80.0 to +80 dBm or 10.0 pW to 100.0 kW 0 to +60.0 dB 0.1 dB or 0.1 xW +10 dBm, reflection –5 dBm, reflection +22 dBm +20 dBm Measurement Accuracy: Measurement accuracy depends on calibration components. Precision calibration components have a directivity of 42 dB. Cable Insertion Loss: Range Resolution 0.00 to 54.00 dB 0.01 dB Spectrum Analyzer: Frequency Range S114B S332B Frequency Reference Aging Accuracy 100 kHz to 1200 MHz 100 kHz to 3000 MHz ±1 ppm/yr ±2 ppm
Page 1: Site Master S113B, S114B, S331B, S3
Page 5 and 6: Table of Contents Chapter 1 - Gener
Page 7 and 8: Chapter 5 - Software Tools Program
Page 9: Chapter 1 General Information The f
Page 13 and 14: Chapter 1 General Information Preve
Page 15 and 16: Chapter 1 General Information Table
Page 17 and 18: Chapter 2 Getting Started Step 2. C
Page 19 and 20: Chapter 2 Getting Started Important
Page 21 and 22: Chapter 3 Functions and Operations
Page 45 and 46: Introduction Chapter 4 Measurements
Page 47 and 48: Selecting the Frequency Range The f
Page 49 and 50: Figure 4-2. Return Loss Measurement
Page 51 and 52: Performing a Calibration Chapter 4
Page 53 and 54: Setting the Markers The following p
Page 55 and 56: Step 36. Repeat steps 1 and 2 for m
Page 57 and 58: Step 9. Use the Up/Down arrow key t
Page 59 and 60: Figure 4-8. DTF - SWR Measurement R
Page 61 and 62:
Figure 4-10. DTF - SWR Measurement
Page 63 and 64:
Making a Measurement with the Spect
Page 65 and 66:
Figure 4-13. Activated normal marke
Page 67 and 68:
Chapter 5 Software Tools Program 5-
Page 69 and 70:
Chapter 5 Software Tools Program Ca
Page 71 and 72:
Chapter 5 Software Tools Program Sa
Page 73 and 74:
Appendix A Reference Data Coaxial C
show all

Anritsu Site Master S332B User Guide - Mr Test Equipment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?