Anritsu Site Master S332B User Guide - Mr Test Equipment

Introduction
Chapter 3
Functions and Operations
This chapter provides a brief overview of the Site Master functions and operations, providing
the user with a starting point for making basic measurements. For more detailed information,
refer to Chapter 4, Measurements and Chapter 5, Software Tools.
The Site Master is designed specifically for field environments and applications requiring
mobility. As such, it is a lightweight, handheld, battery operated unit which can be easily
carried to any location, and is capable of up to 2.5 hours of continuous operation from a
fully charged battery. Built-in energy conservation features allow battery life to be extended
over an eight-hour workday. The Site Master can also be powered by a 12.5 Vdc external
source. The external source can be either the Anritsu AC-DC Adapter (P/N 40-115) or 12.5
Vdc Automotive Cigarette Lighter Adapter (P/N 806-62). Both items are standard accessories.
Front Panel Overview
The Site Master menu-driven user interface is easy to use and requires little training. Mode,
Frequency, Amplitude and Sweep function keys are located just below the display and are
easily configured for optimum measurements. Selection of one of these keys brings up a
function-specific menu on the right hand side of the display. The softkeys adjacent to the
display provide access to the various menu items (See Figure 3-1).
MODE FREQ/DIST AMPLITUDE SWEEP
Figure 3-1. Site Master Soft Keys
Site Master S332B
START
CAL
SAVE
SETUP
AUTO
SCALE
RECALL
SETUP
LIMIT MARKER
SAVE
DISPLAY
ON
OFF
1 2
3
4
5 6
7 8
RECALL
DISPLAY
9 0
PRINT
.
ESCAPE
CLEAR
ENTER
RUN
HOLD
+ -
/
SYS
SOFT KEYS
3-1
3