RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)

Tubing - PVC and TYGON ® Tubing
Item Inside Ø Outside Ø Colour Unit Price
​ mm mm ​ m EURO
339640 4 10 green 5 46.00
339641 4 10 green 15 125.00
339642 4 10 yellow 5 46.00
339643 4 10 yellow 15 125.00
THOMAFLUID ® -PVC High-Pressure Tubing
Product specification
• Light high pressure tubing for industrial processes, also usable as
spray hose for trees (plant protection)
• Very good mechanical stability
• Highly resistant to aging and weather
• Very good dielectric properties
• Antiadhesive surface
Technical specification
• Material: PVC-P (polyvinyl chloride) soft
• Colour: inside black, outside blue
• Temperature range: -15 to +60 °C
• Bursting pressure: 240 bar
• Insert: polyester braiding
• ​ Design: inside and outside smooth
Item
Inside
Ø
Outside
Ø
Max. op.
pressure 1
Min.
bending
radius
Unit
Price
​ mm mm bar mm m EURO
12628 8 15 80 30 5 90.00
12629 8 15 80 30 10 162.00
12630 10 18 80 40 5 100.00
12631 10 18 80 40 10 182.00
12632 13 21 80 60 3 87.00
12633 13 21 80 60 5 136.00
1
at +20 °C
THOMAFLUID ® -PVC Corrugated Tubing
Application area
• Protection of transmission lines during stationary installation and
building in the areas of engine construction, chemical apparatus construction,
electronic engineering as well as for pressureless conveyance
of liquid and gaseous media.
Product specification
• Lightweight, flexible corrugated tubing made of flame-resistant polyvinyl
chloride (PVC-U), grey-yellow or white coloured. Flexible, mechanically
loadable, good electrical properties, good chemical resistance
to alkalis, acids, inorganic salt solutions, oxidants, amines, mineral oils
and fats. Not resistant to aromatic and halogenated solvents.
Tubing made of Elastomers (Soft Rubber)
Technical specification
• Material: PVC (polyvinyl chloride) soft
• Temperature range: 0 to +60 °C (DIN 53446)
• Density: 1.38 g/cm 3 (DIN 53479)
• Tearing strength: 50 N/mm 2 (DIN 53455)
• Elongation at break: 20 - 70 % (DIN 53455)
• E-modulus: 1800 - 3500 N/mm 2 (DIN 53457)
• Impact toughness: without break (DIN 53453)
• Notch impact strength: 2 - 15 (DIN 53453)
• Linear expansion coefficient: 0.6 - 0.9 x 10 -4 x K -1 (DIN 52523)
• Thermal conductivity: 0.15 W/mK (DIN 52612)
• Track resistance: KA3b (DIN 53480)
• ​ Dielectric strength: 45 kV/mm (DIN 53481)
Item
Nominal
width
Outside
Ø
Inside
Ø
Min.
bending
radius
Unit
Price
​ mm mm mm mm m EURO
43367 10 12.9 10 15 5 28.00
43368 10 12.9 10 15 10 48.00
43369 10 12.9 10 15 15 68.00
43370 12 15.8 12 20 5 32.00
43371 12 15.8 12 20 10 58.00
43372 12 15.8 12 20 15 78.00
43376 14 18.6 14.4 25 5 36.00
43377 14 18.6 14.4 25 10 63.00
43378 14 18.6 14.4 25 15 86.00
43379 16 19 15.2 25 5 44.00
43380 16 19 15.2 25 10 77.00
43381 16 19 15.2 25 15 105.00
43382 17 21.2 16.7 30 5 45.00
43383 17 21.2 16.7 30 10 80.00
43384 17 21.2 16.7 30 15 110.00
THOMAFLUID ® -PVC Spiral Chemical Tubing
Product specification
• Flexible and resistant material, resistant to aging and abrasion, rugged
and pressure-proof, inside and outside smooth, hardly inflammable,
to a high degree resistant to hot water and oil (e.g. heating oil) at flow,
sterilizable, no change of material by light or atmospheric oxygen.
Technical specification
• Material: PVC (polyvinyl chloride)
• Colour: crystal-clear
• Shore hardness A: 75° ±3° (DIN 53505)
• Density: 1.25 g/cm 3
• Tensile strength: 190 kp/cm 2
• Elongation at break: 390 %
​•
Tolerance: DIN ISO 3302-1 E2
100 THOMAFLUID ® I - 2015