RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)

More documents

Recommendations

Info

Tubing - EPDM/PP Tubing Technical specification • Material: EPDM/PP (thermoplastic elastomer); Compound of EPDM and PP, as well as stabilizing additives; EPDM (ethylene-propylene-diene rubber); PP (polypropylene) • Colour: yellowish • Shore hardness A: 73° (DIN 53505) • Temperature range: -50 to +140 °C • Density: 0.97 g/cm 3 (DIN 53479 A) • Embrittlement temperature: -75 °C • Insert: polyester braiding as pressure support • Elongation at break: 400 % (DIN 53504-S1) • Tolerance: DIN ISO 3302-1 E2 • Sterilization: autoclavable (+136 °C) • Regulations: meets the recommendations of the BfR as well as the FDA and USP guidelines Unit Price Item Inside Outside Max. op. Ø Ø pressure 1 mm mm bar m EURO 190821 3 8 60 5 93.00 190831 3 8 60 15 236.00 190841 4 9 60 5 113.00 190851 4 9 60 15 254.00 190861 5 10 60 5 121.00 190871 5 10 60 15 294.00 190881 6 11.5 60 5 141.00 190891 6 11.5 60 15 335.00 190901 6 12 60 5 156.00 190911 6 12 60 15 376.00 190921 6 12.5 60 5 162.00 190931 6 12.5 60 15 381.00 190941 7 13 60 5 162.00 190951 7 13 60 15 381.00 190961 8 14.5 60 5 190.00 190971 8 14.5 60 15 443.00 190981 9.5 16 60 5 218.00 190991 9.5 16 60 15 504.00 191001 10 18 40 5 218.00 191011 10 18 40 15 504.00 191021 12 19 40 5 218.00 191031 12 19 40 15 504.00 191061 12.5 19.5 40 5 238.00 191071 12.5 19.5 40 15 553.00 191081 14 23 40 5 300.00 191091 14 23 40 15 698.00 191101 15 24 40 10 635.00 191111 15 24 40 25 1,225.00 191121 16 25.4 40 10 711.00 191131 16 25.4 40 25 1,378.00 191141 18 29.5 40 10 980.00 191151 18 29.5 40 25 1,908.00 191161 19 30.5 40 10 1,021.00 191171 19 30.5 40 25 1,982.00 191181 20 31.5 40 10 1,059.00 191191 20 31.5 40 25 2,058.00 191201 22 33.5 40 10 1,151.00 191211 22 33.5 40 25 2,237.00 191221 24 35.5 40 10 1,225.00 191231 24 35.5 40 25 3,421.00 1 at +20 °C Tubing made of Elastomers (Soft Rubber) THOMAFLUID ® -High-Tech-EPDM/PP Pharmaceutical Tubing Application area • Conveying of sensible and highly purified fluids and of gases • High performance pump tubing for peristaltic Product specification • Flexible and elastic high-tech tubing of highest resistance to bending and abrasion, chemically resistant, free from extractable constituents, complying to the USP Class IV. • Absolutely biocompatible, neither cytotoxic nor hemolytical, approved for direct contact with food and for use in equipments for food production according to the FDA and NSF guidelines 21 CFR 177.2600 • Extremely low permeability to gas, not permeable to UV and daylight, repeatedly autoclavable, and chemically sterilizable • Heat-sealing and bonding properties, up to 30 times longer service lives than comparable silicone products Technical specification • Material: EPDM/PP (thermoplastic elastomer); Compound of EPDM and PP, as well as stabilizing additives; EPDM (ethylene-propylene-diene rubber); PP (polypropylene) • Colour: natural-yellow • Shore hardness A: 68° • Temperature range: -40 to +135 °C • Density: 0.92 g/cm 3 • Embrittlement temperature: -70 °C • Tensile strength: 2.4 MPa (ASTM D412) • Tensile strength at break: 5.9 MPa (ASTM D412) • Elongation at break: 480 % • Permeability: extremely low • Sterilization: autoclavable (+136 °C); gamma-rays (up to 2.5 mrad) • Regulations: GMP-special treatment, meeting the FDA, USP, BfR, and DAB-standards Item Inside Ø Outside Ø Wall thickness Unit Price mm mm mm m EURO 14806 0.5 3.7 1.6 3 66.00 84627 0.5 3.7 1.6 7.5 137.00 14807 0.8 4 1.6 3 79.00 84628 0.8 4 1.6 7.5 163.00 14808 1.6 4.8 1.6 3 96.00 84629 1.6 4.8 1.6 7.5 201.00 14809 1.6 6.4 2.4 3 110.00 14810 1.6 6.4 2.4 7.5 218.00 84630 3.2 6.4 1.6 3 101.00 84631 3.2 6.4 1.6 7.5 209.00 14811 3.2 7.9 2.4 3 113.00 14812 3.2 7.9 2.4 7.5 226.00 14839 3.2 9.5 3.2 3 127.00 14840 3.2 9.5 3.2 7.5 255.00 16 THOMAFLUID ® I - 2015
Tubing - EPDM/PP Tubing Item Inside Ø Outside Ø Wall thickness Unit Price mm mm mm m EURO 84632 4.8 7.9 1.6 3 102.00 84633 4.8 7.9 1.6 7.5 211.00 14813 4.8 9.5 2.4 3 116.00 14814 4.8 9.5 2.4 7.5 233.00 84634 6.4 9.5 1.6 3 124.00 84635 6.4 9.5 1.6 7.5 257.00 14815 6.4 11.1 2.4 3 140.00 14816 6.4 11.1 2.4 7.5 280.00 84636 6.4 12.7 3.2 3 177.00 84637 6.4 12.7 3.2 7.5 354.00 84638 7.9 11.1 1.6 3 129.00 84639 7.9 11.1 1.6 7.5 268.00 14817 7.9 12.7 2.4 3 147.00 14818 7.9 12.7 2.4 7.5 294.00 14819 7.9 15.9 4 1 145.00 14820 7.9 15.9 4 3 362.00 14821 9.5 14.3 2.4 1 89.00 14822 9.5 14.3 2.4 3 218.00 84640 9.5 15.9 3.2 1 104.00 84641 9.5 15.9 3.2 3 260.00 14823 9.5 19 4.8 1 145.00 14824 9.5 19 4.8 3 362.00 14827 12 20 4 1 174.00 14828 12 20 4 3 435.00 84642 12.7 19 3.2 1 121.00 84643 12.7 19 3.2 3 301.00 14825 12.7 22.2 4.8 1 174.00 14826 12.7 22.2 4.8 3 434.00 84644 15.9 22.2 3.2 1 135.00 84645 15.9 22.2 3.2 3 340.00 14829 16 24 4 1 163.00 14830 16 24 4 3 391.00 14831 15.9 25.4 4.8 1 158.00 14832 15.9 25.4 4.8 3 378.00 84646 19 25.4 3.2 1 158.00 84647 19 25.4 3.2 3 378.00 14833 19 28.6 4.8 1 191.00 14834 19 28.6 4.8 3 458.00 14835 25.4 31.8 3.2 1 187.00 14836 25.4 31.8 3.2 3 436.00 14837 25.4 34.1 4.8 1 195.00 14838 25.4 34.1 4.8 3 558.00 THOMAFLUID ® -High-Med-TPE-S Tubing for Medical Engineering and Pharmaceutical Technology Tubing made of Elastomers (Soft Rubber) Application area • Communication technology, medical devices, clinical chemistry, laboratory technology, pharmaceutical technology, pharmaceutical production Product specification • Very good compression set. • Sterilizable. • Autoclavable. • Heat-sealable. • Good resistance to acids and alkalis, but not resistant to fats, oils and highly concentrated alcohols. • The medical compound is tested according to the named medical base certifications and the Drug Master File (DMF). • Free of plasticizers. • Absolutely free of latex and phthalates. • Absolutely resistant to weather and aging. • Outstanding elastic properties. • Pleasant feel and anti-slip properties. • UV-resistant. Technical specification • Material: TPE-S (styrene block copolymer) • Colour: translucent • Shore hardness A: 60° (DIN 53505, ISO 868) • Temperature range: -40 to +120 °C • Sterilization: autoclavable; hot air (+134 °C); gas (ethylene oxide); gamma-rays (2 x kGy) • Density: 0.89 g/cm³ (DIN ISO 1183-1:2004) • Tearing strength: 11.2 N/mm 2 (DIN 53504, ISO 37) • Tear propagation resistance: 18.1 N/mm 2 (DIN ISO 34-1 method B) • Elongation at break: 759.0 % (DIN 53504, ISO 37) • Compression set: at +70 °C / 22h: 32.8 % (ISO 815) at +100 °C / 22h: 49.4 % (ISO 815) • Regulations: Drug Master-File and approval, USP Class IV and 6.6.1, ISO 10993-5, ISO 10993-10 and -11 Item Inside Ø Outside Ø Unit Price mm mm m EURO 351064 0.5 1.5 5 74.00 351065 0.5 1.5 15 168.00 351066 0.5 2 5 76.00 351067 0.5 2 15 170.00 351068 0.8 4 5 98.00 351069 0.8 4 15 232.00 351070 1 3 5 78.00 351071 1 3 15 174.00 351072 1 4 5 94.00 351073 1 4 15 220.00 351074 1.6 3.2 5 80.00 351075 1.6 3.2 15 178.00 351076 1.6 4.8 5 130.00 351077 1.6 4.8 15 304.00 351078 2 4 5 74.00 351079 2 4 15 176.00 351080 2 6 5 136.00 351081 2 6 15 340.00 351082 2.4 5.6 5 126.00 351083 2.4 5.6 15 322.00 351084 3 5 5 88.00 351085 3 5 15 208.00 351086 3 6 5 124.00 351087 3 6 15 290.00 THOMAFLUID ® I - 2015 17
Page 1 and 2: Reichelt Chemietechnik GmbH + Co. T
Page 3 and 4: Inhaltsübersicht Content: Tubing (
Page 5 and 6: Tubing - CR Tubing Tubing made of E
Page 7 and 8: Tubing - EPDM Tubing THOMAFLUID ®
Page 9 and 10: Tubing - EPDM Tubing Unit Price Ite
Page 11 and 12: Tubing - EPDM Tubing Item Inside Ø
Page 13 and 14: Tubing - EPDM Tubing Item Inside Ø
Page 15 and 16: Tubing - EPDM/PP Tubing Tubing made
Page 17: Tubing - EPDM/PP Tubing Tubing made
Page 21 and 22: Tubing - EVA Tubing Technical speci
Page 23 and 24: Tubing - FPM Tubing Tubing made of
Page 25 and 26: Tubing - FPM Tubing Tubing made of
Page 27 and 28: Tubing - FPM Tubing Item Inside Ø
Page 29 and 30: Tubing - Glass Fabric Tubing Tubing
Page 31 and 32: Tubing - Glass Fabric Tubing Tubing
Page 33 and 34: Tubing - IIR Tubing Tubing made of
Page 35 and 36: Tubing - NBR Tubing THOMAFLUID ® -
Page 37 and 38: Tubing - NBR Tubing Product specifi
Page 39 and 40: Tubing - NBR Tubing Tubing made of
Page 41 and 42: Tubing - NBR Tubing Tubing made of
Page 47 and 48: Tubing - NR Tubing Tubing made of E
Page 49 and 50: Tubing - NR Tubing Tubing made of E
Page 51 and 52: Tubing - Polyolefin Tubing Technica
Page 53 and 54: Tubing - PUR Tubing Item Inside Ø
Page 55 and 56: Tubing - PUR Tubing Technical speci
Page 57 and 58: Tubing - PUR Tubing Tubing made of
Page 59 and 60: Tubing - PUR Tubing Product specifi
Page 65 and 66: Tubing - PUR Tubing THOMAFLUID ® -
Page 67 and 68: Tubing - PUR Tubing Item Inside Ø
Page 69 and 70:
Tubing - PVC and TYGON ® Tubing Te
Page 71 and 72:
Tubing - PVC and TYGON ® Tubing
Page 73 and 74:
Tubing - PVC and TYGON ® Tubing Un
Page 75 and 76:
Tubing - PVC and TYGON ® Tubing Tu
Page 77 and 78:
Tubing - PVC and TYGON ® Tubing TH
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Tubing - PVC and TYGON ® Tubing Un
Page 99 and 100:
Tubing - PVC and TYGON ® Tubing It
Page 101 and 102:
Tubing - PVC and TYGON ® Tubing Te
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Tubing - SBR Tubing Technical speci
Page 111 and 112:
Tubing - Silicone Tubing THOMAFLUID
Page 113 and 114:
Tubing - Silicone Tubing Item Insid
Page 115 and 116:
Thomafluid ® I To provide you with
show all

RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?