RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)

Tubing - EPDM/PP Tubing
Technical specification
• Material: EPDM/PP (thermoplastic elastomer);
Compound of EPDM and PP, as well as stabilizing additives;
EPDM (ethylene-propylene-diene rubber); PP (polypropylene)
• Colour: yellowish
• Shore hardness A: 73° (DIN 53505)
• Temperature range: -50 to +140 °C
• Density: 0.97 g/cm 3 (DIN 53479 A)
• Embrittlement temperature: -75 °C
• Insert: polyester braiding as pressure support
• Elongation at break: 400 % (DIN 53504-S1)
• Tolerance: DIN ISO 3302-1 E2
• Sterilization: autoclavable (+136 °C)
• Regulations: meets the recommendations of the BfR as well as the
FDA and USP guidelines
Unit Price
Item Inside Outside Max. op.
Ø Ø pressure 1
​ mm mm bar m EURO
190821 3 8 60 5 93.00
190831 3 8 60 15 236.00
190841 4 9 60 5 113.00
190851 4 9 60 15 254.00
190861 5 10 60 5 121.00
190871 5 10 60 15 294.00
190881 6 11.5 60 5 141.00
190891 6 11.5 60 15 335.00
190901 6 12 60 5 156.00
190911 6 12 60 15 376.00
190921 6 12.5 60 5 162.00
190931 6 12.5 60 15 381.00
190941 7 13 60 5 162.00
190951 7 13 60 15 381.00
190961 8 14.5 60 5 190.00
190971 8 14.5 60 15 443.00
190981 9.5 16 60 5 218.00
190991 9.5 16 60 15 504.00
191001 10 18 40 5 218.00
191011 10 18 40 15 504.00
191021 12 19 40 5 218.00
191031 12 19 40 15 504.00
191061 12.5 19.5 40 5 238.00
191071 12.5 19.5 40 15 553.00
191081 14 23 40 5 300.00
191091 14 23 40 15 698.00
191101 15 24 40 10 635.00
191111 15 24 40 25 1,225.00
191121 16 25.4 40 10 711.00
191131 16 25.4 40 25 1,378.00
191141 18 29.5 40 10 980.00
191151 18 29.5 40 25 1,908.00
191161 19 30.5 40 10 1,021.00
191171 19 30.5 40 25 1,982.00
191181 20 31.5 40 10 1,059.00
191191 20 31.5 40 25 2,058.00
191201 22 33.5 40 10 1,151.00
191211 22 33.5 40 25 2,237.00
191221 24 35.5 40 10 1,225.00
191231 24 35.5 40 25 3,421.00
1
at +20 °C
Tubing made of Elastomers (Soft Rubber)
THOMAFLUID ® -High-Tech-EPDM/PP Pharmaceutical
Tubing
Application area
• Conveying of sensible and highly purified fluids and of gases
• High performance pump tubing for peristaltic
Product specification
• Flexible and elastic high-tech tubing of highest resistance to bending
and abrasion, chemically resistant, free from extractable constituents,
complying to the USP Class IV.
• Absolutely biocompatible, neither cytotoxic nor hemolytical, approved
for direct contact with food and for use in equipments for food production
according to the FDA and NSF guidelines 21 CFR 177.2600
• Extremely low permeability to gas, not permeable to UV and daylight,
repeatedly autoclavable, and chemically sterilizable
• Heat-sealing and bonding properties, up to 30 times longer service
lives than comparable silicone products
Technical specification
• Material: EPDM/PP (thermoplastic elastomer);
Compound of EPDM and PP, as well as stabilizing additives;
EPDM (ethylene-propylene-diene rubber); PP (polypropylene)
• Colour: natural-yellow
• Shore hardness A: 68°
• Temperature range: -40 to +135 °C
• Density: 0.92 g/cm 3
• Embrittlement temperature: -70 °C
• Tensile strength: 2.4 MPa (ASTM D412)
• Tensile strength at break: 5.9 MPa (ASTM D412)
• Elongation at break: 480 %
• Permeability: extremely low
• Sterilization: autoclavable (+136 °C); gamma-rays (up to 2.5 mrad)
• Regulations: GMP-special treatment, meeting the FDA, USP, BfR, and
​ DAB-standards
Item Inside Ø Outside Ø Wall thickness Unit Price
​ mm mm mm m EURO
14806 0.5 3.7 1.6 3 66.00
84627 0.5 3.7 1.6 7.5 137.00
14807 0.8 4 1.6 3 79.00
84628 0.8 4 1.6 7.5 163.00
14808 1.6 4.8 1.6 3 96.00
84629 1.6 4.8 1.6 7.5 201.00
14809 1.6 6.4 2.4 3 110.00
14810 1.6 6.4 2.4 7.5 218.00
84630 3.2 6.4 1.6 3 101.00
84631 3.2 6.4 1.6 7.5 209.00
14811 3.2 7.9 2.4 3 113.00
14812 3.2 7.9 2.4 7.5 226.00
14839 3.2 9.5 3.2 3 127.00
14840 3.2 9.5 3.2 7.5 255.00
16 THOMAFLUID ® I - 2015