RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)
Thomafluid ® I - Tubings made of elastomers Laboratory Tubings Pressure Tubings Pharmaceutical Tubing Pump Tubings Materials: CR - chloroprene rubber EPdm - ethylene-propylene-diene rubber EPdm/PP - copolymer EVa - ethylene-vinyl-acetate fPm - fluorinated rubber Glass fabric iiR - isobutylene-isoprene-rubber NBR - butadiene-acrylonitrile rubber NR - natural rubber Polyolefine PuR - polyurethane PVC - polyvinyl chloride SBR - styrene-butadiene rubber Silicone
Thomafluid ® I - Tubings made of elastomers
Laboratory Tubings
Pressure Tubings
Pharmaceutical Tubing
Pump Tubings
Materials:
CR - chloroprene rubber
EPdm - ethylene-propylene-diene rubber
EPdm/PP - copolymer
EVa - ethylene-vinyl-acetate
fPm - fluorinated rubber
Glass fabric
iiR - isobutylene-isoprene-rubber
NBR - butadiene-acrylonitrile rubber
NR - natural rubber
Polyolefine
PuR - polyurethane
PVC - polyvinyl chloride
SBR - styrene-butadiene rubber
Silicone
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tubing - CR Tubing<br />
THOMAFLUID ® -CR Gas Tubing for Gas Burner<br />
with End Sleeves<br />
Product specification<br />
• High flexibility and elasticity of both, tubing and stainless steel armor<br />
• Kinking not possible, therefore interruption of gas feeding excluded<br />
• End sleeves stick closely to the hose nozzle even without attachment<br />
Technical specification<br />
• Material: CR (chloroprene rubber)<br />
• <strong>Co</strong>lour: orange-red<br />
• Max. operating pressure: up to 100 mbar<br />
• Max. temperature: +70 °C<br />
• Regulations: for all kind of gas burners according to DIN 30665 and<br />
all gases according to DVGW working sheet G 260; DIN-DVGW-Reg.-<br />
No. G92e073<br />
Tubing made of Elastomers (Soft Rubber)<br />
Technical specification<br />
• Material: EPDM<br />
• <strong>Co</strong>lour: black<br />
• Shore hardness A: 70° ±5° (DIN 53505)<br />
• Temperature range: -60 to +160 °C<br />
• Density: 1.36 g/cm 3<br />
• <strong>Co</strong>mpression set: 17 % at +75 °C / 22 h<br />
• Tearing strength: 75 kg/cm 2<br />
• Elongation at break: 280 %<br />
• Rebound elasticity: 36 %<br />
• Notch impact strength: 5 - 6 kg/cm 2<br />
• Thermal conductivity: 165 - 280 kcal/h x m 2 <br />
x °C<br />
Item Inside Ø Outside Ø Length Unit Price<br />
mm mm mm piece EURO<br />
12307 9 13 500 1 59.00<br />
12308 9 13 600 1 64.00<br />
12309 9 13 750 1 69.00<br />
12310 9 13 1,000 1 80.00<br />
12311 9 13 1,250 1 90.00<br />
12312 9 13 1,500 1 95.00<br />
12313 9 13 2,000 1 116.00<br />
12314 9 13 3,000 1 177.00<br />
Unit Price<br />
Item Material Width of Max. op.<br />
bottom pressure 1<br />
mm bar m EURO<br />
93169 EPDM 8 1.5 6 113.00<br />
93170 EPDM 15 1.5 6 167.00<br />
43902 EPDM 30 1.5 6 266.00<br />
1<br />
at +20 °C<br />
<strong>RCT</strong> ® -Accessories: Profile <strong>Co</strong>nnector made of<br />
Stainless Steel<br />
Application area<br />
• <strong>Co</strong>nnecting and coupling of THOMAFLUID ® <br />
-Heat Exchanger Profile Tubing<br />
EPDM Tubing<br />
THOMAFLUID ® -Heat Exchanger EPDM Profile Tube<br />
Application area<br />
• <strong>Co</strong>oling, heating, and warming of reaction flasks, chromatography<br />
columns and troughs, cultivation vessels, measuring set-ups.<br />
Product specification<br />
• Elastic, thermoconductive special tube with optimized circular segment<br />
profile, for winding around all kind of equipment, with connecting<br />
pieces fitting to the tubing connection of thermostates and other<br />
thermomedia conveying systems. Pressure- and temperature loadable,<br />
high thermal conductivity due to special polymer formulations and<br />
large effective contact surfaces<br />
• Width of contact surface (width of bottom) alternatively 8, 15 or<br />
30 mm, length 6 m each<br />
• Optionally, special connecting pieces for coupling of heat exchanger<br />
tubes of equal dimensions (items 43906 to 439081)<br />
• Usable for water, steam, cooling brine, lower and higher alcohols (such<br />
as methanol, ethanol, and glycols) as well as for motor oils. Not usable<br />
for halogenated and aromatic hydrocarbons<br />
• Ethyl alcohol is used as cooling liquid below 0 °C<br />
Item Width of bottom <strong>Co</strong>nnection type Unit Price<br />
mm piece EURO<br />
43906 8<br />
Nozzle (NW 4)<br />
with int. thread 1/4“<br />
2 30.00<br />
439061 8 Double nozzle (NW 4) 2 26.00<br />
43907 15<br />
Nozzle (NW 8)<br />
with int. thread 1/2“<br />
2 30.00<br />
439071 15 Double nozzle (NW 8) 2 26.00<br />
43908 30<br />
Nozzle (NW 15)<br />
with int. thread 1“<br />
2 30.00<br />
439081 30 Double nozzle (NW 15) 2 26.00<br />
4 THOMAFLUID ® I - 2015
Change language