RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)

Tubing - EPDM/PP Tubing
Technical specification
• Material: EPDM/PP (thermoplastic elastomer) - NORPRENE ® ;
Compound of EPDM and PP, as well as stabilizing additives; EPDM
(ethylene-propylene-diene rubber); PP (polypropylene)
• Colour: black
• Shore hardness A: 65° ±5°
• Temperature range: -45 to +135 °C
• Density: 0.97 g/cm 3
• Elongation at break: 380 %
• Embrittlement temperature: -60 °C
• Tolerance: DIN ISO 3302-1 E2
• Comparison of working life in peristaltic pumps:
​ EPDM/PP tubing = 135 h, silicone tubing = 100 h, PVC tubing = 90 h
Item Inside Ø Outside Ø Unit Price
​ mm mm m EURO
340656 2 4 5 56.00
340657 2 4 15 148.00
340658 3 5 5 62.00
340659 3 5 15 164.00
340660 4 6 5 66.00
340661 4 6 15 176.00
340662 4 7 5 78.00
340663 4 7 15 206.00
340664 5 8 5 88.00
340665 5 8 15 236.00
340666 6 9 5 90.00
340667 6 9 15 238.00
340777 6 10 5 114.00
340778 6 10 15 294.00
340779 7 10 5 98.00
340780 7 10 15 260.00
340781 8 12 5 112.00
340782 8 12 15 312.00
340783 10 14 5 134.00
340784 10 14 15 342.00
340785 12 17 5 192.00
340786 12 17 15 488.00
340787 15 21 5 234.00
340788 15 21 15 564.00
340789 18 21 5 298.00
340790 18 21 15 732.00
340791 20 27 5 342.00
340792 20 27 15 838.00
Tubing made of Elastomers (Soft Rubber)
THOMAFLUID ® -EPDM/PP Peristaltic Pump Tubing -
imperial
Product specification
• Robust peristaltic pump and chemical tubing.
• Extremely long service lives compared to common tubing material.
• Mechanically highly loadable.
• Best elastic behaviour (highly flexible).
• Very good abrasion resistance.
• Good thermal resistance.
• Very good resistance to aging, ozone and weather
• Low gas permeability versus rubber tubing like NBR, NR or EPDM.
• Suitable for joining with adhesives and heat-sealing.
Technical specification
• Material: EPDM/PP (thermoplastic elastomer);
Compound of EPDM and PP, as well as stabilizing additives; EPDM
(ethylene-propylene-diene rubber); PP (polypropylene)
• Colour: black
• Shore hardness A: 61° ±3°
• Temperature range: -35 to +135 °C
• Density: 0.98 g/cm 3
• Embrittlement temperature: -60 °C
• Tensile strength: 6.9 MPa (ASTM D412)
• Ultimate elongation: 375 %
• Compression set: 27 % at +70 °C / 22 h
• Dielectric strength: 21.1 kV/mm (ASTM D149-97)
• Water absorbtion: 0.30 % at +23 °C / 24 h
• Tolerance: DIN ISO 3302-1 E2
• Comparison of working life in peristaltic pumps:
​ EPDM/PP tubing = 135 h, silicone tubing = 100 h, PVC tubing = 90 h
Item Inside Outside Max. op. Max. op. Unit Price
Ø Ø pressure 1 pressure 2
​ mm mm bar bar m EURO
92913 1.6 4.8 2.34 1.45 5 54.00
92914 1.6 4.8 2.34 1.45 10 90.00
92915 1.6 4.8 2.34 1.45 15 116.00
92916 3.2 6.4 1.31 0.83 5 72.00
92917 3.2 6.4 1.31 0.83 10 123.00
92918 3.2 6.4 1.31 0.83 15 156.00
92919 4.8 7.9 0.9 0.55 5 92.00
92920 4.8 7.9 0.9 0.55 10 162.00
92921 4.8 7.9 0.9 0.55 15 205.00
92922 6.4 9.5 0.69 0.41 5 116.00
92923 6.4 9.5 0.69 0.41 10 200.00
92924 6.4 9.5 0.69 0.41 15 254.00
92925 7.9 11.1 0.55 0.34 5 136.00
92926 7.9 11.1 0.55 0.34 10 233.00
92927 7.9 11.1 0.55 0.34 15 294.00
92928 9.5 12.7 0.48 0.28 5 162.00
12 THOMAFLUID ® I - 2015