RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid I (EN)

Tubing - EVA Tubing
Technical specification
• Material: EPDM/PP (thermoplastic elastomer);
Compound of EPDM and PP, as well as stabilizing additives;
EPDM (ethylene-propylene-diene rubber); PP (polypropylene)
• Colour: black
• Temperature range: -40 to +120 °C, for a short time +150 °C
• Insert: with embedded steel wire spiral
• Bending radius: 1 x inside diameter
Item Inside Ø Min. bending radius Unit Price
​ mm mm m EURO
303250 50 60 5 226.00
303251 50 60 10 316.00
303252 60 70 5 241.00
303253 60 70 10 337.00
303254 75 85 5 256.00
303255 75 85 10 358.00
303256 80 90 5 286.00
303257 80 90 10 399.00
303258 90 100 5 296.00
303259 90 100 10 414.00
303260 100 110 5 312.00
303261 100 110 10 436.00
303262 110 120 3 224.00
303263 110 120 5 298.00
303264 127 140 3 246.00
303265 127 140 5 328.00
303266 152 170 3 286.00
303267 152 170 5 381.00
EVA Tubing
THOMAFLUID ® -EVA Chemical Tubing
Product specification
• Low density.
• Very good abrasion resistance.
• Outstanding mechanical stability.
• Antiadhesive surface (absolutely smooth-walled).
• Very good resistance to aging and weather.
• Best dielectric properties.
• Hardly inflammable.
• Good impact strength, even at low temperatures.
• Tasteless and odourless.
• Flexible and resistant material.
• Lowest permeability to steam and gas, thus best gas-tightness (for
use as CO 2
pipeline in dispensing equipment).EVA ideally combines the
properties of PE of low density with those of soft PVC.
• The material combination shows excellent resistance even to critical
media, e.g. formic acid (85 %), ethanol, ethylene diamine, ethylene
glycol, benzyl alcohol, butanol, cyclohexanol, acetic acid, hydrofluoric
acid, formaldehyde, isopropanol, caustic potash, perchloric acid
(70 %), phosphoric acid (95 %), propionic acid, pyridine, nitric acid
(30 %), hydrochloric acid (conc.), sulphuric acid (70 %), hydrogen
peroxide (100 %) etc.
Technical specification
• Material: EVA (ethylene vinyl acetate copolymer)
• Colour: translucent
• Shore hardness A: 84° ±5° (DIN 53505)
Tubing made of Elastomers (Soft Rubber)
• Temperature range: -20 to +80 °C
• Density: 0.931 g/cm 3 (DIN 53479)
• Elongation at break: 700 % (DIN 53455)
• Dielectric constant: 2.6 at 10 6 Hz (DIN 53483)
• Permeability to steam: 4.5 g / (m 2 x d) (DIN 53122)
​• Tolerance: DIN ISO 3302-1 E2
Unit Price
Item Inside Outside Max. op.
Ø Ø pressure 1
​ mm mm bar m EURO
332404 0.5 1.5 20 10 114.00
332405 0.5 1.5 20 20 198.00
332406 0.5 1.5 20 40 352.00
332407 0.5 2 30 10 114.00
332408 0.5 2 30 20 198.00
332409 0.5 2 30 40 352.00
332410 1 3 20 10 114.00
332411 1 3 20 20 198.00
332412 1 3 20 40 352.00
332413 1 4 30 10 126.00
332414 1 4 30 20 218.00
332415 1 4 30 40 388.00
332416 2 4 10 10 118.00
332417 2 4 10 20 206.00
332418 2 4 10 40 366.00
332419 3 5 7 10 132.00
332420 3 5 7 20 226.00
332421 3 5 7 40 402.00
19211 3 6 12.5 10 102.00
19212 3 6 12.5 20 184.00
19213 3 6 12.5 40 332.00
19214 4 6 8 10 102.00
19215 4 6 8 20 184.00
19216 4 6 8 40 332.00
19217 4 8 12.5 10 118.00
19218 4 8 12.5 20 212.00
19219 4 8 12.5 40 382.00
19220 4 10 12.5 10 136.00
19221 4 10 12.5 20 244.00
19222 4 10 12.5 40 440.00
19223 5 8 8.5 10 112.00
19224 5 8 8.5 20 202.00
19225 5 8 8.5 40 364.00
19226 5 12 12.5 10 170.00
19227 5 12 12.5 20 306.00
19228 5 12 12.5 40 552.00
19229 6 8 6.5 10 128.00
19230 6 8 6.5 20 234.00
19231 6 8 6.5 40 418.00
THOMAFLUID ® I - 2015 19