Installation Manual Truck Edition V-500 Series - Thermo King

More documents

Recommendations

Info

Electrical Connections - Evaporator 1. Connect the defrost temperature switch harness (12-01 - CH-01) to the connector on the switch. 2. Connect the fan harnesses to the fans: FAN #1 (EF1-01 - CH-07) FAN #2 (EF2-01 - CH-04) FAN #3 (EF3-01 - CH-03) 3. Connect the return temperature sensor harness (SN1-01 - SN2-01) to the sensor. 4. ES-<strong>500</strong> MAX UNITS ONLY: Connect the defrost heater harnesses (7T-01 - CH-02, 7T-02 - CH-05) to the resistance wires connectors. 5. ES-<strong>500</strong> MAX UNITS ONLY: Route the defrost resistance wires out through the drain tube connections. 36
Electrical Connections - Evaporator 37
Page 1 and 2: Installation Manual Truck Edition V
Page 3 and 4: Safety Precautions . . . . . . . .
Page 5 and 6: Recover Refrigerant At Thermo King,
Page 7 and 8: WARNING: Never drill holes in the u
Page 9 and 10: Always keep electrical harness and
Page 11 and 12: Required Tools 11
Page 13 and 14: ES-500 Dimensions A. 22.0 in. (562
Page 15 and 16: Installation of Vehicle Powered Com
Page 17 and 18: Installation of V-500 Condenser 17
Page 19 and 20: Installation of ES-500 / ES-500 MAX
Page 21 and 22: Cut the Hose 1. Cut the hose to pro
Page 23 and 24: Snap on the Cage. 5. Snap the cage
Page 25 and 26: CAUTION: TK 2000 Speedy Clip System
Page 27 and 28: Installation of Hoses to the Vehicl
Page 29 and 30: Installation of the Jet Cool System
Page 31 and 32: Installation of Hoses to Condenser
Page 33 and 34: Installation of Hoses to Evaporator
Page 35: System Leak Check and Evacuation 35
Page 39 and 40: Installation of Drain Hoses 39
Page 41 and 42: Installation of the In-Cab Controll
Page 43 and 44: Installation of the Electric Standb
Page 45 and 46: Electrical Connections -Battery 45
Page 47 and 48: System Charging 47
Page 49: Refrigeration Diagrams 49

Installation Manual Truck Edition V-500 Series - Thermo King

Create successful ePaper yourself

Delete template?

Save as template?