Installation Manual Truck Edition V-500 Series - Thermo King
Installation Manual Truck Edition V-500 Series - Thermo King
Installation Manual Truck Edition V-500 Series - Thermo King
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> of the Electric Standby Power Supply (Option)<br />
DANGER: Electrical cord must not be connected to an electrical<br />
power source during installation.<br />
NOTE: <strong>Thermo</strong> <strong>King</strong> recommends a 20 amp fused power source for<br />
electric standby operation.<br />
IMPORTANT: See drawing 2C21034 (in back of this manual) for<br />
receptacle wiring instructions.<br />
1. Choose an appropriate location, remove cover and mount receptacle<br />
box to truck with appropriate hardware.<br />
2. Route the electrical wire from the unit to the receptacle box providing<br />
for a drip loop. Secure using the clamps provided.<br />
3. Cut off the excess electrical wire and connect to receptacle.<br />
IMPORTANT: Do not roll up the excess electrical wire or create splices<br />
in the electrical wire.<br />
4. Reinstall cover.<br />
42
Change language