Teach Yourself Borland C++ in 14 Days - portal

TIP
More on Projects
You can add more than one source file at a time. To add multiple files,
select the files to add in the Add To Project dialog box. When you click
OK, all of the files selected will be added to the project.
Remove Unit
Use this option to remove files from the project. Files removed from the project are not
deleted from your hard drive, but are just removed from the project compile/link process.
WARNING
Be careful when removing units from your projects. You need to take
care not to remove units that are referenced by other units in the
project. If you remove units that are required by your project, a
compiler or linker error will result. Before removing a unit, be sure that
it is not used anywhere in your project.
The Project Manager window itself does not allow multiple selection. If you want to delete
several units, you will have to delete them one at a time.
View Unit
When you click the View Unit speed button, the source code for the currently selected unit
is displayed in the Code Editor. If no unit is selected or if no source unit exists for the selected
unit, this button is disabled. For example, a binary resource file (.res) does not have a source
file. If you click on a binary resource file in the Project Manager window, the View Unit
button will be disabled.
View Form
The View Form button displays the form associated with the currently selected unit. The
form is displayed in the Form Designer. As with the View Unit button, the View Form button
will be disabled if no form exists for the selected unit.
357
10