Jenkins Fan Catalog

SerieS 2 - paDDle Wheel
Line
#
N
E
W
Overall
Diam
(D)
Our Fan
Catalog
Number
List
Price
$
Refer to
Photo #
Blades,
Material,
Wt (ibs)
Width
of
Blades
(A)
70 15 2-5202 $261.00 275 6-Al-4 1-3/8 5 1-1/4 0 --- 4-1/2 4”OH
71 16-3/8 2-18 522.00 202 12-Al-8 2-1/2 4-3/8 1-1/2 1-1/4 --- 3-5/8
72 17-1/2 2-4925 457.00 --- 14-Al-7 3-1/8 3-5/8 1-1/2 0 --- 3-1/8
73 18-3/8 2-14 718.00 255 12-Al-11 2-1/4 10 1-1/2 1-3/8 --- 9-1/4 440T
74 18-1/2 2-382 1304.00 225 12-Al-20 3 8-7/8 1-1/8 0 --- 8-3/8 Special
75 22-3/4 2-4959 196.00 --- 16-Al-3 2 6-1/8 2-5/8 0 --- 5-5/8
76 25-3/8 2-4800 1761.00 --- 16-Al-27 3-3/4 11-1/2 2-1/4 0 --- 11
77 28-1/8 2-408 2673.00 225 16-Al-41 3-1/4 13 2-1/4 0 --- 13 8”OH
Hub
Diam
(B)
Hub
Thickness
(C)
Hub
Recess
(E)
Plate
Diam
(H)
Maximum
Allowed
Bore
Typical
Frame
Number
SerieS 3 - flaT BaCkeD
In 1981, we included our old Series 3 which had a deep dish (large “E”
dimension) with our Series 6 listing. Most of the styles were obsolete. We
are now reusing Series 3 to indicate those fans, which have a negligible “E”
dimension i.e. flat backed fans. Modern, foreign, and American motor designs
often have squared off or flat end bells, so no recess is required in the fan’s
hub area. These fans can be used on many Baldor, GE, Toshiba and other
brands. Photo 315 refers to fan blade used to blow dust, chips, etc. in material
handling. These fans are not specifically designed for motor cooling.
Line
#
N
E
W
Overall
Diam
(D)
Our Fan
Catalog
Number
List
Price
$
Refer to
Photo #
Blades,
Material,
Wt (ibs)
Width
of
Blades
(A)
Hub
Diam
(B)
Hub
Thickness
(C)
Hub
Recess
(E)
Plate
Diam
(H)
Maximum
Allowed
Bore
Typical
Frame
Number
1 4-1/4 3-503 $66.00 21 10-Al-1 7/8 7/8 3/4 0 3 1/2
2 4-3/8 3-2835 66.00 21 12-Al-1 1/2 1-1/8 1/2 0 3 5/8
3 4-7/8 3-5072 66.00 --- 10-Al-1 7/8 1-7/16 1/2 0 4 15/16
4 5 3-3417 66.00 315 8-Al-1 1-1/2 7/8 5/8 0 5 1/2 Blower
5 5-3/4 3-7300 66.00 19 12-Al-1 1-1/4 1-1/4 3/4 0 4-3/8 3/4 Gear
6 5-7/8 3-6835 66.00 91 14-Al-1 1/2 1-3/8 1/2 0 3-1/4 7/8
7 6-1/8 3-4931 131.00 --- 16-Al-2 1-3/4 1-1/2 7/8 0 6-1/8 1
8 6-1/4 3-4642 66.00 315 6-Al-1 2-9/16 1-1/4 1-1/4 0 6-1/4 3/4
9 6-1/4 3-4953 131.00 --- 8-Al-2 2-1/8 2-3/4 1-3/8 0 4-1/2 2-1/4
10 6-1/2 3-135 131.00 320 6-Al-2 1 3-1/8 1 0 6-1/2 2-5/8
11 6-3/4 3-4270 131.00 310 12-Al-2 2 1 1-3/4 0 6-3/4 1/2
12 6-7/8 3-5089 66.00 --- 10-Al-1 1-3/8 2-5/16 7/8 3-1/6 5-1/4 1-13/16
13 7 3-0 66.00 --- 12-Al-1 1-5/8 2-1/2 3/4 1-1/2 4-1/4 2
14 7-1/8 3-4071 66.00 320 12-Al-1 3/4 1-1/8 1 0 2-1/8 5/8
15 7-5/8 3-3821 66.00 93 12-Al-1 1-1/2 2-1/8 1 0 5 1-5/8
16 7-3/4 3-445 131.00 320 6-Al-2 1-3/4 2-3/8 1-3/16 0 7-3/4 1-7/8
17 7-3/4 3-4685 66.00 --- 7-Al-1 1-1/4 1-7/8 1-1/8 0 4-5/8 0
18 7-7/8 3-4976 196.00 --- 6-Al-3 2 2-3/4 2 0 7-7/8 2-1/4
19 8-1/8 3-2280 131.00 21 12-Al-2 1-1/2 2 1-1/4 0 6-1/2 1-1/2
20 8-1/8 3-4478 66.00 89 12-Al-1 1-3/8 1-1/2 1-1/4 1/4 6-3/8 1
21 8-1/2 3-156 196.00 315 6-Al-3 2-1/2 2-3/4 2 0 8-1/2 2-1/4 Blower
22 • 8-5/8 3-1 131.00 --- 15-Al-2 2-1/4 2-1/8 1 5/8 5-7/8 1-3/4
23 8-5/8 3-4765 326.00 --- 6-Al-5 2-3/4 1-1/4 2-3/4 -1/2 8-5/8 3/4
24 8-3/4 3-5073 66.00 --- 11-Al-1 1-1/8 2-3/8 1 0 4-1/2 1-7/8
25 8-7/8 3-4462 131.00 310 6-Al-2 2-3/4 1 1-3/8 0 8-7/8 1/2 Blower
26 9 3-5016 131.00 --- 12-Al-2 1-5/8 2-1/4 1-1/4 0 6-3/4 7/8
27 9-17/16 3-4695 66.00 --- 12-Al-1 1-1/8 1-11/16 3/4 0 8-1/8 1-1/8
28 9-5/8 3-370 131.00 123 12-Al-2 2-1/4 2-1/4 1-5/8 5/16 9-3/4 1-3/4 G.E.
29 9-5/8 3-8587 131.00 145 8-Al-2 1-5/8 2 1 0 5-1/4 1-1/2 Leroy S.
34
See Table B2 on page 5 for blank fan machining charges.
For more photos please visit our website at www.jenkins.com