Jenkins Fan Catalog

Motor Parts
MOTOR SPACE HEATERS
HEATER NAMEPLATES
STANDARD & METRIC EYEBOLTS
MOTOR SPACE HEATERS (UL RECOGNIZED)
Wire-wound, silicone rubber covered heater with 8” teflon leads. All heaters are 0.055” thick and insulated for 500°F.
Catalog
Watts
List Price
Number Size* Rating 120V 240V**
H-1 x 5 1” x 5” 25 $73.00 CALL
H-1 x 10 1 x 10 50 57.00 CALL
H-1 x 15 1 x 15 75 59.00 CALL
H-1 x 20 1 x 20 100 66.00 CALL
H-1 x 25 1 x 25 125 79.00 CALL
H-1 x 30 1 x 30 150 95.00 CALL
H-1 x 40 1 x 40 200 118.00 CALL
H-2 x 5 2 x 5 50 48.00 CALL
H-2 x 15 2 x 15 150 81.00 CALL
H-2 x 20 2 x 20 200 93.00 CALL
H-2 x 25 2 x 25 250 97.00 CALL
H-2 x 30 2 x 30 300 119.00 CALL
H-2 x 40 2 x 40 400 143.00 CALL
H-NAME 1 x 3 Nameplate 6.00 CALL
** Add (-2) to the catalog number to specify 240V)
Motor Total
Frame* Watts
140 25
180 25
210 50
250 75
280 100
320 125
360 150
400 150
440 200
500 300
APPLICATION RECOMMENDATIONS
Lace unit to outside of end turns to head the winding
directly. Wire contactor to energize heater when
motor stops. This reduces condensation and thermal
shock. A lower heating rate is obtained by applying
lower voltage to the heaters. For example, two equal
heaters connectd in series produce 1/2 the heat of
one heater at full voltage. DC motors may take 50-
100% more heat to keep them dry. Explosion proof
motors require heaters connected at 1/2 voltage.
HEATER NAMEPLATE
MOTOR SPACE HEATERS
STANDARD & METRIC EYEBOLTS
PLAIN PATTERN- INCH THREAD - (DIMENSION: IN. & LBS)
Jenkins Thread Shank Eye Eye Maximum
Catalog Diameter Length I.D. O.D. Capacity
Number (A) (B) (C) (D) (lbs)
Weight
Each
(lbs)
List
Price
($)
EYE-0.250 1/4 1 3/4 1-3/16 440 0.05 $9.00
EYE-0.3125 5/16 1-1/8 7/8 1-7/16 720 0.09 9.00
EYE-0.375 3/8 1-1/4 1 1-21/32 1080 0.13 11.00
EYE-0.4375 7/16 1-3/8 1-3/32 1-27/32 1480 0.19 12.00
EYE-0.500 1/2 1-1/2 1-3/16 2-1/16 1960 0.30 14.00
EYE-0.625 5/8 1-3/4 1-3/8 2-1/2 3160 0.55 19.00
EYE-0.750 3/4 2 1-1/2 2-13/16 4600 0.89 24.00
EYE-0.875 7/8 2-1/4 1-11/16 3-1/4 6400 1.34 33.00
EYE-1.000 1 2-1/2 1-13/16 3-9/16 8400 1.97 42.00
EYE-1.125 1-1/8 2-3/4 2 4 10000 2.94 72.00
EYE-1.250 1-1/4 3 2-3/16 4-7/16 13400 4.00 87.00
EYE-1.500 1-1/2 3-1/2 2-1/2 5-3/16 18000 6.36 143.00
SHOULDER PATTERN - METRIC THREAD - (DIMENSION: MM & KG)
Jenkins
Catalog
Number
Thread
Diameter
(A)
Shank
Length
(B)
Eye
I.D.
(C)
Eye
O.D.
(D)
Maximum
Capacity
(kg)
Weight
Each
(lbs)
List
Price
($)
EYE-M6 M6 x 1.0 25 19 30 210 0.05 $13.00
EYE-M7 M7 x 1.0 25 22 37 370 0.09 15.00
EYE-M8 M8 x 1.25 25 25 42 500 0.15 16.00
EYE-M10 M10 x 1.5 25 28 47 740 0.23 17.00
EYE-M12 M12 x 1.75 25 30 53 1030 0.33 17.00
EYE-M14 M14 x 2.0 44 35 64 1600 0.64 21.00
EYE-M16 M16 x 2.5 44 35 64 1600 0.64 25.00
EYE-M18 M18 x 2.5 51 38 72 2140 0.96 29.00
EYE-M20 M20 x 2.5 57 43 83 2860 1.55 41.00
EYE-M24 M24 x 3.0 63 46 92 3850 2.11 53.00
• The maximum capacity is only for straight lifting: these eyebolts are not suitable for angular lifts. Bolt
material is C-1030 heat treated - minimum tensil strength is 65,000 psi, UNC-2A thread per ASTM A489 and
ANSI B18.15.
• Do not paint or coat eyebolt surface. Inspect regular for flaws in threads and body.
• Heat above 480°C or welding will damage eyebolts.
• Threads should be fully engaged for maximum strength.
• Plain or shoulder pattern eyebolts in alloy or stainless, eye nuts, etc. available by special order.
70
Because of recurring price changes, Please CALL for OEM List Prices.
For additional information please visit our website at www.jenkins.com