MT25-ProgramBook

Tue-Af-Po2.08-02
Stacked tape HTS conductors for Fusion Magnets
Davide Uglietti, Nikolay Bykovsky, et al.
EPFL – SPC, Lausanne, Switzerland
Tue-Af-Po2.08-03 [138]
Finite element analysis of strain distribution of REBCO
coated conductors subjected to bending conditions experienced
in high-field magnet applications
Federica Pierro, Luisa Chiesa, Soren Prestemon, et al.
Tufts University, USA
Tue-Af-Po2.08-04 [139]
Recent progress in development of high performance
CICCs for CFETR magnet
Jinggang Qin
-
Tue-Af-Po2.08-05 [140]
Manufacturing of CFETR CSMC Full-size Conductors
Jinggang Qin
Institute of Plasma Physics, CAS, China
Tue-Af-Po2.08-06 [141]
Current Capacity of Cu-sheathed Multi-filamentary
Coated Conductors under the Influence of Spatial Variation
of Local Critical Currents in Each Filament
Kohei Higashikawa, Takumi Suzuki, et al.
Kyushu University, Japan
Tue-Af-Po2.08-07 [142]
Numerical Study on Electro-thermal Characteristics of
Core Cable Consisted Of YBCO Coated Conductor
Shanshan Fu, Ming Qiu, Jianbo Guo, Jiahui Zhu, et al.
China Electric Power Research Institute, China
Tue-Af-Po2.08-08 [143]
Experimental study on the effect of twisting on critical
currents of Nb3Sn cable-in-conduit conductors
Shinsaku Imagawa
National Institute for Fusion Science, Japan
Tue-Af-Po2.08-09 [144]
Current sharing properties of REBCO superconducting
parallel conductors wound into a coil
Shintaro Sagawa, Masataka Iwakuma, et al.
Kyushu University, Japan
Tue-Af-Po2.08-10 [145]
Lessons learnt by manufacturing 100 km of varied type
of Cable-in-Conduit-Conductors
Simonetta Turtu', Sandro Chiarelli, et al.
ENEA, Italy
Tue
103