MT25-ProgramBook

Poster Session 2.10 13:15 - 15:00 Posters Area
Multiphysics Design and Analysis
Tue-Af-Po2.10-01 [169]
Comparative study between in-situ measurements and a
3D efficient model for the computation of magnetic
fields in High Field Polyhelix magnets
Christophe Trophime, Cécile Daversin, et al.
LNCMI – CNRS, France
Tue-Af-Po2.10-02 [170]
A Hybrid Method for the Sound Pressure Lever Analysis
of a Balanced Armature Receiver
Dan-ping Xu, Sang-moon Hwang, Joong-hak Kwon, et al.
Sch. of Mech. Eng., Pusan National University, Korea
Tue-Af-Po2.10-03 [171]
A finite element model based on T-A formulation for simulating
second generation high temperature superconducting
coils/stacks with large number of turns
Fei Liang, Huiming Zhang, Min Zhang, Weijia Yuan, et al.
University of Bath, Bath, United Kingdom
Tue-Af-Po2.10-04 [172]
Refinement and application of a generic CFD toolkit covering
the heat flows in combined solid–liquid systems to
investigate thermal quench limits of superconducting
magnets
Fouad Aabid and Rob van Weelderen
CERN, Geneva, Switzerland
Tue-Af-Po2.10-05 [173]
A Study on Analytical Methods of FEM-based Edge Heating
System
Geochul Jeong, Jong-suk Lim, Gang-seok Lee, et al.
-
Tue-Af-Po2.10-06 [174]
Eddy Current Loss Analysis of Surface Mount High
Speed Permanent Magnet Motor Base on Multi-physics
Fields
Rui Dai, Fengge Zhang, Guangwei Liu and Shi Jin
Shenyang University of Technology
Tue-Af-Po2.10-07 [175]
Thermo-Magnetic Mechanical stability study of the MICE
Spectrometer Solenoids
Heng Pan, Soren Prestemon, Steve Virostek, et al.
LBNL
Tue
107