MT25-ProgramBook

Wed
Wed-Af-Po3.08-04 [111]
Capability improvement design method considering
eddy current loss reduction of axial-flux permanent magnet
coupling with Halbach array structure using 3-D
FEM.
Jang-Young Choi, Gang-Hyeon Jang, Sung-Won Seo, et al.
Chungnam National University, Korea
Wed-Af-Po3.08-05 [112]
Design and Experimental Verification of Punching Using
a Pulsed Electromagnetic Force
Hang Zhang, Ning Liu, Qingjian Wang, et al.
Huazhong University of Science and Technology, China
Wed-Af-Po3.08-06 [113]
Embedded flexible Fe-Si-Al powder composite-film inductor
for a Low Power DC-DC Converters
Jae-woo Lim, Hee-jun Kim, Yong-seung Oh, et al.
Dept. of Electr. Systems Eng., Hanyang University, China
Wed-Af-Po3.08-07 [114]
Analysis of Torque Characteristics according to Gear ratio
of Coaxial Magnetic Gear
Jeong-In Lee, Jang_Young Choi, Tae-Kyoung Bang, et al.
Chungnam National University, Korea
Wed-Af-Po3.08-08 [115]
Development of three stage electromagnetic forming facility
and its timing control system
Jianfeng Xie, Liang Li, Qunliang Cao, et al.
Huazhong University of Science and Technology, China
Wed-Af-Po3.08-09 [116]
Study on Electromagnetic Force Distribution and Copper
Fatigue Performance in Electromagnetic Strengthening
with Axial Compression
Li Qiu, Yijie Yu and Liang Li
-
Wed-Af-Po3.08-10 [117]
Electromagnetic Deep Drawing of Aluminum Cylindrical
Cup with High Depth-diameter Ratio
Meng Chen, Quanliang Cao, Zhipeng Lai, Hong Cai, et al.
Huazhong University of Science and Technology, China
Wed-Af-Po3.08-11 [118]
Influence of Operating Parameters on Discharge Characteristics
of Superconducting High Field Magnetron
Tianlong Wang, Qingquan Qiu, Fei Qu, Liwei Jing, et al.
Institute of Electrical Engineering, CAS, China
134