MT25-ProgramBook

Tue
Tue-Af-Po2.09-10 [161]
Simulation of the ITER Toroidal Field Coil Case welding
distortion using Finite Element Method
Marc Jimenez, P. Aprili, P. Barbero, J. Cornella, et al.
Fusion For Energy, Barcelona, Spain
Tue-Af-Po2.09-11 [162]
Influence of bolt positions and electrode structure in
Yoroi-coil structure on stress distribution in an HTS coil
winding
Masahiro Kato, Daisuke Miyagi, Makoto Tsuda, et al.
Tohoku University, Japan
Tue-Af-Po2.09-12 [163]
Tail Component Qualification for the EU ITER PF Coils
Mikel bilbao Gutierrez, Kevin Smith, et al.
Fusion for Energy, Barcelona, Spain
Tue-Af-Po2.09-13 [164]
Stress-strain behaviors of a Nb3Sn Superconducting
prototype solenoid for ECR magnet during winding,
cooldown and energizing processes
Beimin Wu, Mingzhi Guan, Wang Xingzhe, Hu Qiang, et al.
Tue-Af-Po2.09-14 [165]
Strain response of superconducting magnets during excitation
and quench training based on FBG and cryogenic
strain gauge measurements
Qiang Hu, Mingzhi Guan, Xingzhe Wang and Beimin Wu
Lanzhou University; Institute of Modern Physics, CAS, China
Tue-Af-Po2.09-15 [166]
Degradation of Critical Current in an HTS Tape Considering
Curvature of Elliptical Shape under Combined Bending
and Torsion
Seunghak Han, Jeyull Lee, Haeryong Jeon, et al.
Yonsei University, Korea
Tue-Af-Po2.09-16 [167]
Experimental Study on the Mechanical Stress Effect on
the Degradation of High Temperature Superconducting
Coils
Toru Ueki, Hiroharu Kamada, Akira Ninomiya, et al.
Meiji University, Tokyo, Japan
Tue-Af-Po2.09-17 [168]
Study of bending behavior in Nb3Sn strands
Tsutomu Hemmi, Stefanus Harjo, Hideki Kajitani, et al.
National Institutes for Quantum and Radiological Science
and Technology, Japan
106