MT25-ProgramBook

Wed-Af-Po3.10-04 [150]
Structural optimization methodology of the 2-D inner-leg
cross-section for the Toroidal Field Coils of fusion reactors
Giordano Tomassetti, Lorenzo Giannini, et al.
ENEA, Italy
Wed-Af-Po3.10-05 [151]
A Study on the V-t Characteristics of PPLP according to
Electric Field Uniformity for a Superconducting Transformer
Hyoungku Kang, Hongseok Lee and Onyou Lee
Korea National University of Transportation, Korea
Wed-Af-Po3.10-06 [152]
Mechanical properties of aged 316LN butt-welding joint
at cryogenic temperature for CFETR CS model coil
Huan Jin, Yu Wu, Jingang Qin, Guojun Liao, et al.
ASIPP, Institute of Plasma Physics, CAS, China
Wed-Af-Po3.10-07 [153]
Mechanical properties of ITER CICC jacket in China
Jinggang Qin
ASIPP, Institute of Plasma Physics, CAS, China
Wed-Af-Po3.10-08 [154]
Critical Current Properties of Precisely Cation Composition
Controlled RE123 Melt-Solidified Bulks
Jun-ichi Shimoyama, Takumi Sato, et al.
Aoyama Gakuin University, Japan
Wed-Af-Po3.10-09 [155]
Particle Reinforced Cu Matrix Conductors for High Field
Pulsed Magnets
Ke Han, Robert Goddard, Vince Toplosky, et al.
National High Magnetic Field Laboratory, Tallahassee, USA
Wed-Af-Po3.10-10 [156]
Upper critical and irreversibility magnetic fields and
transport properties of bulk K-, Ni-, and Co-doped
BaFe2As2 pnictides for different granularities and their
prospects in magnet design
Martin Nikolo, John Singleton, Jyanyi Jiang, et al.
Saint Louis University, USA
Wed-Af-Po3.10-11 [157]
Size effect on the strength of Cu-Ag microcomposites by
accumulative drawing and bundling process
Ming Liang, Pengfei Wang, Xiaoyan Xu, Tao Peng, et al.
Northwest Institute for Non-ferrous Metal Research, China
Wed
139