MT25-ProgramBook
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Oral Session 7 17:00 - 18:30 Emerald Room<br />
Nb 3Sn Dipole Magnets for Accelerators<br />
Session Chairs: Pasquale Fabbricatore & Giorgio Ambrosio<br />
Mon-Af-Or7-01 17:00<br />
Design and construction of the first full-length prototype<br />
of the 11T dipole magnet for the High Luminosity LHC<br />
Project at CERN<br />
Frederic Savary, Christian Hannes Loffler, et al.<br />
CERN, Geneva, Switzerland<br />
Mon-Af-Or7-02 17:15<br />
Cold powering tests of the 2 meter Nb3Sn DS11T model<br />
magnets at CERN<br />
Gerard Willering, Marta Bajko, Hugo Bajas, et al.<br />
CERN, Geneva, Switzerland<br />
Mon-Af-Or7-03 17:30<br />
Design and test results of the Nb3Sn Canted-Cosine-<br />
Theta dipole magnet CCT4<br />
Diego Arbelaez, Lucas Brouwer, Shlomo Caspi, et al.<br />
Lawrence Berkeley National Laboratory, Berkeley, CA, USA<br />
Mon-Af-Or7-04 17:45<br />
Design and fabrication of a 15 T Nb3Sn accelerator dipole<br />
demonstrator<br />
Alexander Zlobin, Emanuela Barzi, Shlomo Caspi, et al.<br />
Fermilab, USA<br />
Mon-Af-Or7-05 18:00<br />
Measurements of Persistent Current Effects in FNAL<br />
11 T Nb3Sn Dipole Models<br />
Thomas Strauss, Gueorgui Velev, et al.<br />
Fermilab, USA<br />
Mon-Af-Or7-06 18:15<br />
Electromechanical Design of a 16 T CCT Twin-Aperture<br />
Dipole for FCC<br />
Bernhard Auchmann, Lucas Brouwer, Shlomo Caspi, et al.<br />
CERN, Geneva, Switzerland<br />
Mon<br />
77
Change language