MT25-ProgramBook

Wed-Af-Po3.08-12 [119]
Design, fabrication, and test of a dual-coil system for
electromagnetic sheet forming
Ning Liu, Zhipeng Lai, Quanliang Cao, et al.
Huazhong University of Science and Technology, China
Wed-Af-Po3.08-13 [120]
Realization and commissioning of WAVE Neutrons a
Wide Aperture Vector Magnet for Neutron scattering experiments
delivered Turn Key
Raphael Pasquet, Alexandre Bataille, et al.
Sigmaphi, France
Wed-Af-Po3.08-14 [121]
A Study on the Power Converter Performance Comparison
& Optimal design induction heating coil for IH jar
Hee-jun Kim, Sang-taek Lee and Yong-seung Oh
Hanyang University, Korea
Wed-Af-Po3.08-15 [122]
Analysis of deep drawing of stainlesss steel sheet using
electromagnetic forming with a driver sheet
Shoufeng Xu, Quanliang Cao, Xiaotao Han, et al.
Huazhong University of Science and Technology, China
Wed-Af-Po3.08-16 [123]
Measurement and Torque Calculation of Magnetic Spur
Gear Based on Quasi 3-D Analytical Method
Tae-Kyoung Bang, Jang-Young Choi, et al.
Chungnam National University, Korea
Wed-Af-Po3.08-17 [124]
Development of Conduction-cooled Superconducting
Split Coil for Metal Melting by DC Induction Heating
Tomonori Watanabe, Shigeo Nagaya, Naoki Hirano, et al.
Chubu Electric Power Co., Inc., Japan
Wed-Af-Po3.08-18 [125]
Study on Magnetic Field of Stacked Permanent Magnets
in Magnetic Liquid Inclination Sensor
Wenrong Yang, Xiaorui Yang, Lifei Chen and Bing Guo
Hebei University of Technology, China
Wed-Af-Po3.08-19 [126]
Flow Analysis of Magnetic Fluid around a Permanent
Magnet in Magnetic Fluid Damper
Xiaorui Yang, Qingxin Yang, Wenrong Yang, et al.
Hebei University of Technology, China
Wed
135