MT25-ProgramBook

Wed-Af-Po3.06-12 [88]
Characteristic Analysis for the Influence of Auxiliary
Teeth and Notching on the Reduction of the Detent
Force of a Permanent Magnet Linear Synchronous Generator
Sung-won Seo, Jang-young Choi, Min-mo Koo, et al.
Chungnam National University, Korea
Wed-Af-Po3.06-13 [89]
Characteristic Analysis and Experimental Verification for
a Double-sided Permanent Magnet Linear Synchronous
Generator According to Magnetization Array
Sung-Won Seo, Jang-Young Choi, Gang-Hyeon Jang, et al.
Chungnam National University, Korea
Wed-Af-Po3.06-14 [90]
Moduling Axial-flux Compensated Pulsed Alternator
Caiyong Ye, Jiangtao Yang and Xin Liang
Huazhong University of Science and Technology, China
Wed-Af-Po3.06-15 [91]
Study on the no-insulation ReBCO pancake coils for superconducting
synchronous machines
Yali Zheng
Luoyang Normal University, China
Poster Session 3.07 13:15 - 15:00 Posters Area
Levitation, Bearing and Separation
Wed
Wed-Af-Po3.07-01 [92]
Design of hybrid thrust magnetic bearing for heavy rotating
shaft considering self-weight compensation according
to axial load
Ji-Hun Ahn, Jang-Young Choi, Cheol Han, et al.
Chungnam National University, Korea
Wed-Af-Po3.07-02 [93]
Detailed analysis of conduction-cooled MgB2 for use in
superconducting magnetic density separation
Marc Dhallé, Chao Zhou, Dorus Dijkstra, et al.
University of Twente, Enschede, the Netherlands
Wed-Af-Po3.07-03 [94]
The Number of Magnet Poles Decision Method of Magnetic
Gear for Torque Ripple Reduction
Eui-jong Park, Sang-Yong Jung, Sung-Jin Kim, et al.
Chosun University, Korea
131