MT25-ProgramBook

Wed
Wed-Af-Po3.06-04 [80]
Study on fault-tolerant control of open-winding brushless
doubly-fed wind power generator
Shi Jin, Guangwei Liu, Long Shi and Liancheng Zhu
Shenyang University of Technology, China
Wed-Af-Po3.06-05 [81]
Rotor Structure Design and Optimization of MW-class
Brushless Doubly Fed Generator for Offshore Wind Turbine
Hao Wang, Guangwei Liu, Fengge Zhang, Siyang Yu, et al.
Shenyang University of Technology, China
Wed-Af-Po3.06-06 [82]
Design and Operation Performance Research of Brushless
Doubly-Fed Generator with Cage Bar Assisted Reluctance
Rotor
Siyang Yu, Fengge Zhang, Yutao Wang, Shi Jin, et al.
Shenyang University of Technology, China
Wed-Af-Po3.06-07 [83]
Design and Magnet Field Analysis of Slotless Linear
Generator for Wave Energy Conversion
Jing Zhang, Haitao Yu, Lei Huang and Rong Guo
Jinling Institute of Technology, Nanjing, China
Wed-Af-Po3.06-08 [84]
Influence of Rotor Structure on End Effects of High-
Speed Permanent Magnet Synchronous Generators Using
3D Finite Element Analysis
Kyung-hun Shin, Jang-Young Choi and Han-Wook Cho
Chungnam National University, Korea
Wed-Af-Po3.06-09 [85]
Analytical Modeling and Experimental Verification for
Electromagnetic Analysis of Permanent Magnet Linear
Synchronous Machines with Horizontally Magnetized Permanent
Magnets accounting for Flux-Passing Iron Pole
Kyung-hun Shin, Jang-Young Choi, Han-Wook Cho, et al.
Chungnam National University, Korea
Wed-Af-Po3.06-10 [86]
Study on a Novel Transverse-flux Tubular Linear Permanent-magnet
Generator for Stirling Engine
Weibo Zhong, Haitao Yu, Minqiang Hu, et al.
School of Electrical Engineering, Southeast University, China
Wed-Af-Po3.06-11 [87]
AC loss analysis of the armature windings of a fully HTS
rotating machine with dual field windings
Woo-seok Kim, Sang Ho Park, Seyeon Lee, et al.
Korea Polytechnic University, Korea
130