ce magazine march 2018 issue

Now, this was the way that I have connected my computer to my folio. At the risk
of being repetitive, I highly recommend that you hookup your compressor before
the amp after hooking up all your connections from input source to mixer, effects to
mixer, mixer to equalizer then
equalizer to compressor, see figure 2.
Get the best power strip or voltage
regulator/conditioner your budget can
afford (higher the joules rating the
better) I use one designed for
computers, remember electrical
spikes will do weird things to
electronic equipment). By the way, an
alternate way of hooking up your sub
woofer is to split the secondary out
from the Audio Pulse and run the 2nd
line to the woofer amp or as in figure
2, I line out from my main amp to
input to sub woofer amp. I hope this
took some of the mystery out of
hooking up a mixer. If you have a
unique way of hooking up your
equipment or have a question let us hear from you.
Now, wiring the mixer for permanent in door sound….
With age comes a wealth of experience, nowadays my mixer hook up is slightly
different, not by much, but enough to be different. Now I don’t Dj anymore,
however, in my rec-room/bar I have held karaoke parties and general parties with
all my music from my cd’s turned digital which will be another how do article.
The mixer with all the accessories mounted on a steel rolling cabinet with all the
support equipment. As you can see the picture below this will give you a good idea
how to wire up your main station.
17